Thermal camera shipments heat up as prices melt

Reduced prices and high unit growth have led to increased demand in the commercial security sector for thermal cameras.

11/25/2013


The uncooled thermal security camera market is forecast see high unit shipment growth of 25% over the next 5 years, close to twice the rate of the CCTV and video surveillance market. This high unit growth is being caused by steep declines in average selling prices which means thermal cameras are more appealing to the commercial security sector, according to a new report from IHS Inc. (NYSE: IHS), a leading global source of critical information and insight.  

Un-cooled thermal cameras lend themselves well to the commercial security market. They are able to see in complete darkness, cover wide areas, are not affected by bad weather conditions, or altering light conditions, and are well suited to video analytics. Despite this, in previous years, un-cooled thermal cameras were considered to be too expensive and saw limited impact within the commercial security market. However, this new report from IHS, identifies that some companies have reported price drops in excess of 20% in recent years, and that this continued price decline is expected to make these products more inviting to the commercial security market.  

“Two major reasons for the price decline that the industry is currently experiencing. These are increased competition, and new technology developments,” commented Oliver Philippou, report author and market analyst for video surveillance at IHS.   

IHS also expects increased competition from new manufacturers entering the thermal market to impact prices. Traditional visible light camera manufacturers are expected to have new and renewed interest in the un-cooled thermal camera market within the next 18 to 24 months. This will allow these manufacturers to offer total video surveillance solutions on large scale projects.

Some companies are expanding their product range, and have begun to offer lower priced entry-level products. These entry level products would have lower specifications than some current products and are expected to be used to target new end-user markets, that are not currently being serviced by thermal cameras. 

As operations in Iraq and Afghanistan reduced and exit strategies were put in place by the various allied forces, government funding for un-cooled thermal cameras for military applications has slowed, leaving manufacturing capacity in excess of military market demand. This has caused companies such as DRS Technologies and MOOG, that have strong military connections, to offer much less expensive thermal cameras to the commercial security market. This has thrown a new dynamic on the pricing structure of the thermal market. 

Philippou continues, “However, the high price decline will mean that revenue growth will be limited for the next couple of years growing, before experiencing increasingly higher growth over this reports forecast period to 2017.” 

- Edited by CFE Media. See more security-related research.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me