The key to Keystone? Just build it right

Keystone XL is an economic issue, and an environmental issue, and a political issue. Before any of that, however, Keystone XL is an engineering issue.

06/03/2014


In the continuing debate over the proposed Keystone XL pipeline, there really are just two sides. You either favor building it, or you favor shelving it. The debate is black and white, left and right, pro and con. You either can see the economic benefit and believe the environmental impact can be managed, or you believe the environmental risk is simply too great, no matter the economic benefit.

And if that’s all I had to say on the topic, or if that’s all there was to the topic, there’d be a lot of white space at the bottom of this page. But I don’t. And it isn’t. And there won’t be.

The pipeline, stretching more than 2,000 miles from the oil sands of Canada to the Gulf of Mexico, has generated debate and delay since it was first proposed, and the hard lines that have been drawn over this project simply harden as time passes.

One fact that is little understood is that three phases of Keystone already are in operation. Phase 1 extends from the Hardisty Terminal in Alberta east through Saskatchewan and Manitoba, then south through the Dakotas and terminating at Steele City, Neb., and then east again through Missouri to Wood River, Ill. Phase 2 connects Steele City and Cushing, Okla., and Phase 3 runs from Cushing to Houston and Port Arthur, Tex.

The proposal for Phase 4 would essentially eliminate the Phase 1 routing and cut the corner by going almost straight southeast from Alberta through Montana, South Dakota, and western Nebraska to Steele City.

Keystone XL is an economic issue, and an environmental issue, and a political issue. Many people I talk to in our industry see it as a manufacturing issue as well. Before any of that, however, Keystone XL is an engineering issue. That’s the part of this debate that is widely overlooked, yet it is to me the most crucial part of the debate. So I quietly offer this idea, and wait for the e-mail box to load up with the responses:

Let’s not build Keystone XL. Let’s build Keystone XL right, the first time.

The immediate howls from the environmental supports suggests that it can’t be done, that we can’t trust that it will be done, that there is no way to build such a project so that it will have no impact.

The Keystone supporters will sit back and appreciate someone coming out with some kind words about this project, given all the protests about it to date, and given the lack of leadership from anyone east of the Potomac on this project.

And you’re both wrong. The key word is to build it right. Right is not fast or cheap or environmentally insensitive. It will cost more than the projected $7 billion that it will take to build Keystone properly, and those who support the project had better be prepared to come to the table with that additional money, not as a gesture of good will or good faith but because they are absolutely, unfailingly committed to building it correctly and are prepared to unflinchingly demonstrate how that can happen.

And given that commitment, those with legitimate environmental concerns must be willing to see that commitment, understand the parameters of such a project on both sides, and also unfailingly understand that “right” does not mean “perfect” or “infallible.”

We have faced such challenges before. The Interstate Highway system wasn’t really started until 1956 when President Eisenhower saw the benefits of the system and signed the enabling bill into law. It was built over the next 36 years, and while it still undergoes changes (our readers in Charlotte and Atlanta can attest to that), the basic system connects most everyone in the contiguous U.S. with most everyone else along one more or less continuous highway system. Yes, it was done well, but it was not perfect. In the end, though, it has been essential to our economy, our national defense (one of the understated reasons the system was created), and our ability to see America from behind the wheel of our car.

While all this was going on, we tackled a far more daunting project in the 1960s when President Kennedy challenged America to send a man to the moon by the end of the decade. In his famous 1962 speech on the topic, Kennedy said, “We choose to go to the moon in this decade and do the other things, not because they are easy, but because they are hard, because that goal will serve to organize and measure the best of our energies and skills, because that challenge is one that we are willing to accept, one we are unwilling to postpone, and one which we intend to win.”

For me, there are no words which so completely sum up my America as those. We always should strive to do great things, to marshal our efforts toward great achievement. We have before. We can again.

So build the pipeline. Just build it right.



Anonymous , 06/10/14 08:41 AM:

Finally a rational position - Well written, should be understood by all - then approve it, build it!
Greg , NC, United States, 06/11/14 02:09 PM:

The keystone crosses some of the largest aquifers in the United States. The question is not if it ruptures but when will it rupture 2, 5, 10 years. The pipeline has an inherent flaw built in. Abrasive tar sands in metal piping. The pipeline will rupture and contaminate the underlying aquifer - can we take this chance just to pad the wallets of politicians?
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me