The future is looking bright for residential lighting control

Several lighting manufactures have demonstrated or released products that offer full lighting control for the residential space.

07/09/2012


In the past, having remote-controllable lighting in the home was something seen mainly in movies, and owned by only the few who could afford such a system. However, this is all about to change. Several lighting manufactures have demonstrated or released products that offer full lighting control for the residential space, at the right price point for consumers to take advantage of.  

Insteon has announced the release of an 8-W networked LED light bulb which features dual-band technology, meaning it can transmit over a building’s existing wires (powerline) or via wireless communication. These LED light bulbs can fit into traditional light fixtures, are fully dimmable and can be controlled by a remote control that is included in the package. Alternatively, with the use of an Insteon gateway, the system can be controlled by other devices such as smart phones or tablets. These light bulbs cost as low as $29, which puts them below the price of some standard LEDs.

I first saw light bulbs with integrated connectivity technology at Smart Lighting 2012 when I saw a demonstration of Greenwave Reality’s RF-enabled CFL and LED light bulbs. These light bulbs use NXP’s JenNet-IP wireless technology to connect the bulb to a dedicated remote, or again to a third-party device such as smart phone, when utilizing a gateway.

The great benefit of these systems is that they can be fitted into traditional lighting fixtures and only require the shipped remote for advanced control. This minimizes the cost implications that most consumers would have to endure when fitting systems that require new fixtures. With full lighting control at an appropriate price point, and in the form of a traditional light bulb with installation requiring no other skills than screwing it in to the fixture, advanced lighting controls will available to even the least ‘tech savvy’ people.

With solutions such as these, you will never find yourself dwelling on the question “did I remember to turn off the lights?” as the answer will only be a few clicks on your smart phone away.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me