The assembly line turns 100

The first moving assembly line debuted by Ford for the Model T production on October 7, 1913.

10/07/2013


The first moving assembly line was created by Ford at their Highland Park plant for the production of the model T on October 7, 1913. Courtesy: Ford Motor CompanyOct. 7 marks a century of progress for manufacturing. It was on this date when the modern assembly line was born, changing forever how goods would be manufactured and lowering the cost of manufacturing to make those goods more affordable for consumers.

The moving assembly line debuted on October 7, 1913, by Ford Motor Company at the company's Highland Park, Mich., assembly plant. The line's efficiency helped Ford make vehicles at a greater rate while making the vehicles more affordable.

Before the moving assembly line, the cars were handmade, and the manufacturing process was stationary. The chassis stayed in one place until the vehicle was finished. Car prices remained high as a result because of the time and effort required by skilled labor to finish a car.

The company came onto an idea in April 1913 after a production engineer decided to improve the time spent putting together a flywheel magneto by separating the process into 29 steps, with each step given to a different worker down an assembly line. The assembly time to assemble a flywheel magneto was cut from 20 minutes to five, and Ford decided to expand the process to engine construction and other parts of the vehicle.

On October 7, 1913, a rudimentary final assembly line was rigged at the new Highland Park plant. A chassis was pulled slowly across the factory floor by rope and windlass. Parts and 140 assemblers were stationed along the 150-foot line, and they attached parts to the car as the winch dragged the chassis across the floor. Production time for a single vehicle fell from 12 hours and 30 minutes to 5 hours and 50 minutes.

A conveyor system with a power drive improved the system and allowed workers to install parts on both sides of the vehicle. By 1914, continuous improvement had whittled the time required for assembly to 93 minutes.

Source: Ford Motor Co. Edited by Chris Vavra, CFE Media.



Anonymous , 10/21/13 01:39 PM:

In this day and age it seems we easily forget those before us. Little thought is given to those individuals with the intelligence and drive to push us forward. Today many “leaders” work for short term gains, and not for long term continuous improvement. Always good to look back and see how we got to where we are, and to pay tribute to those that forged a path forward.
Don A.
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me