Tests are fine if they test performance

When Grade I Electrician Art Roland opted for early retirement, Maintenance Supervisor Harry Crane pulled out the roster. Two names stood out as likely candidates for promotion from Grade II to Grade I: Pete Wilcox and George Johnson.

03/01/1999


When Grade I Electrician Art Roland opted for early retirement, Maintenance Supervisor Harry Crane pulled out the roster. Two names stood out as likely candidates for promotion from Grade II to Grade I: Pete Wilcox and George Johnson. From an experience standpoint both men appeared qualified. The question was: Which one is most qualified?

He gave each candidate two tests: a general intelligence test, and a test that related specifically to the work. Wilcox scored 84% on the performance test to Johnson's 83%. But his score on the intelligence test was 13% higher than Johnson's. That decides it, Crane thought.

Within minutes of posting his choice, Johnson appeared at Crane's desk. He wanted to know why, since their performance scores were almost the same, and since he had better seniority than Wilcox, he didn't get the job.

"Wilcox did much better on the IQ test," Crane replied.

"That doesn't mean beans," Johnson said. "That test is obsolete and has no bearing on the job's performance."

Crane shrugged. "You're entitled to your opinion."

"Darn right I am," Johnson replied sullenly.

Question: Does Johnson have an actionable case against Crane's decision?

Belcher's verdict: When Plant Engineer Frank Belcher learned about the intelligence test on which Crane had based his decision, he told the supervisor it was as outmoded as button down shoes and instructed him to discontinue using it.

"Johnson's black, isn't he?"

"Yes, but that has nothing to do -- "

"I'm sure it doesn't, but it's important to realize that these ancient general tests are all the more unfair in that they give Caucasian workers an edge. Tests can be useful, but only if they test performance as it applies to the job."





The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me