Taking the longer view

Practical energy sustainability for industry

04/16/2013


We’ve heard the wry comment, “When you’re up to your neck in alligators, sometimes you forget that your mission was to drain the swamp.” Aside from the general inadvisability of destroying wetlands, the comment reminds us that often short term needs can distract us from laudable long term goals such as working harmoniously, conserving natural resources, or offering lasting value to customers. Certainly this challenge is one faced by industrial process and energy managers. The effects of prudent long-term energy management sometimes create conflict with short term bottom-line targets. 

Energy Improvements a Hard Sell?

In these pages from time to time we have discussed significant opportunities for major energy savings with simple paybacks of three, five or seven years. We know from experience that these steps are sometimes difficult to accept or sell if they will negatively affect immediate profitability. A recent presenter at a Technology & Market Assessment Forum sponsored by the Energy Solutions Center discussed this challenge, and provided perspectives on where the future may lie. Russ Chapman from Firebridge, Inc., an Ontario-based combustion engineering firm, gave some views on the topic.

Chapman noted the value proposition for the broad concept of sustainable industries – those that can thrive long-term by balancing the needs of people (both employees and customers), the environment and the business.  This challenge is both acute and obvious in decisions involving energy. A decision not to adopt energy-conserving equipment and processes might lead to a better short-term bottom line, but likely will lead to a longer-term lack of competitiveness, thus adversely affecting customers and employees, while adding to the excessive depletion of resources, and  environmental damages.

Paybacks are Possible

Chapman gave as an example Dow Chemical, which has reported that by investing less than $2 billion to improve its resource efficiency since 1994, it has accumulated savings of over $9.8 billion by reducing waste of bothwater and energy in its manufacturing processes. By this process and by integrating other environmental, safety and health-related goals into its processes, it has maintained global competitiveness and has surpassed Kyoto Protocol greenhouse gas emission targets.

The presentation stressed the influence of appropriate energy resource decisions on industrial corporation risk management, and on reducing exposure to any effects from emerging environmental regulation. As an example he cited mining giant BHP Billiton, which managed its exposure to future regulations by proactively reducing its emissions.

Chapman suggests that a strong case can be made for taking the longer view. Financing instruments are available that repay the cost of energy improvements with savings. Once the project is amortized – perhaps three to five years – the savings drop to the bottom line.  He also stresses that greenhouse gas emission restrictions will likely make these improvements inevitable, so why not begin to capture the savings today?

Further, he feels that savings in site productivity, product quality and workplace safety often accompany these facility improvements. Correctly selected, and innovatively financed, needed energy improvements can even begin showing on the bottom line immediately. Taking the longer view can also mean taking the smarter view.

More Info:

ESPRC Centre Sustainability Information

Energy Solutions Center Industrial Efficiency

Firebridge



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me