Take care in interviewing disabled job applicants

On one hand, you want to be a "good guy" and do the "right thing." On the other hand, you have an operation to run. Work has to get done properly and on time. Productivity standards must be maintained.

11/01/1998


On one hand, you want to be a "good guy" and do the "right thing." On the other hand, you have an operation to run. Work has to get done properly and on time. Productivity standards must be maintained. So what's a manager to do?

Above all, combine care with compassion, as Engineering Project Supervisor Harry Rose learned the hard way. Studying Bill Daly's job application form, Rose reached two conclusions: 1. The applicant was well qualified for the maintenance planner's job for which he had applied. 2. Judging from a variety of other factors, he was probably gay. Which, Rose believed, shouldn't be a factor in the employment decision. Qualified was qualified.

What concerned the supervisor was the possibility that Daly might have AIDS, a disease that is more prevalent in the gay community. He thought Daly didn't look healthy. But looks can be deceiving, and Rose wasn't a medical expert.

So we're back to the what-to-do question, Rose thought. He couldn't very well ask Daly if he was gay. And it would be discriminatory to come right out and ask if he had AIDS. On the other hand, Rose thought, maybe he could get around it by asking the applicant what prescription drugs he was currently using. Daly reacted to the query with anger and indignation.

"That question violates the Equal Opportunity Commission guidelines. I could sue you for that. In fact, I think I will."

Rose was stunned by Daly's reply and didn't know quite how to respond.

Question : What do you think? Did the applicant have a right to make the threat?

Walker's verdict: "Yes, he did," Plant Engineer Tom Walker told Rose when he asked him the question. "You can't be too careful when interviewing job applicants with a real or suspected disability. It's acceptable to inquire into a person's ability to handle a job or describe how he would perform it. But inquiry into the state of his health, subtle or not, can be tricky. Your question about drugs is a good example. It doesn't pass muster. When in doubt, your best course is to consult the personnel or legal department."





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me