SymCom Interview

Warren Leopold interview with Mark Baker

09/05/2003



 

 

 

 

 

aceutical, paper & pulp, waste water treatment, fresh water and other processes.

 

 

 

 

 

nt from a wide range of electrical disturbances including single phasing, reverse phasing, and voltage imbalance.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

s were burning out.   Dunham & Associates, an engineering firm here in Rapid City, had an office in Minneapolis at that time, and our CEO, George Dunham, was aware of those problems and set to work to find a solution.  SymCom was the result, and a dairy farmer received the first Model 1000, which protected against loss of phase on the milking machines.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

n, single phasing condition, or a reverse phasing condition.  For example, say a MotorSaver is installed in an application with critical motors, and the voltage becomes unbalanced because the customer has one of the phases loaded, such as lights in their parking lot. If the MotorSaver were not installed in the system, this voltage unbalance could result in damage to the motor.  Every degree centigrade that the motor temperature rises degrades the motor’s longevity.  MotorSaver shuts the motor off, waits a customer-specified time, and turns the motor back on when the conditions are safe.

 

 

e pump can run dry and its motor will burn up.  A PumpSaver installed in this system will recognize that the pump is running dry and will shut the pump motor off.  After waiting a customer-specified time interval, the PumpSaver will check the conditions, and restart the pump when it is safe, and possible damage to the motor has been averted

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

coming into our city

 

 

 

 

 

to set the standards for operation.  At the factory, SymCom has progressed from using components which were installed by hand, to using components which are no bigger than the tip of your pen and are installed by machine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

symcominc.com , or through advertising in trade journals, or contacting the factory directly. We have a distribution network set up throughout the country and all of our stocking distributors and their contact information are listed on our website. We advertise regularly in trade journals.

 

 

 

 

 

 

 

 

 

 

 

 


Sales@symcominc.com



www.symcominc.com

 

 





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me