Sun powered engineering: College students enter solar decathlon; solar energy race car
Solar energy engineering has heated up with help from university students, Texas Instruments and Woodhead Industries. Automation, instrumentation, and controls benefit from solar energy for powering of remote instrumentation, sensors, and controls, as well as through development of lower powered devices.
Dallas, TX and Lincolnshire, IL —Solar energy engineering has heated up with help from university students, Texas Instruments Woodhead Industries
. Automation, instrumentation, and controls benefit from solar energy for powering of remote instrumentation, sensors, and controls, as well as through development of lower powered devices. .
Photos follow below.
University students are using solar cells and power conversion technology from Texas Instruments, which supports the 2007 Solar Decathlon as a contributing sponsor. The event brings together 20 global university teams in a competition to design, build, and operate the most energy-efficient and attractive solar-powered home. Sponsored by the U.S. Department of Energy, the Solar Decathlon culminates with a solar village on the National Mall in Washington, DC, Oct. 12-20.
TI’s philosophy is that living green no longer has to be about deprivation or going without the latest convenience. It’s about creating smarter “greener” technology that can use the earth’s resources more efficiently.
Among key electronics used in a solar power system is the inverter, which converts direct current from solar panels into usable household alternating current and synchronizes that current with the grid. The majority of converters are based on TI’s digital signal processing (DSP) chip technology, which enables maximum system efficiency during all weather conditions, including cloudy and low light days. TI says its chip innovation is addressing power challenges to make solar power and sustainable designs increasingly viable, and many of the Solar Decathlon university teams are using TI technology in their solar-powered homes.
The only semiconductor company sponsoring the event, TI is donating hundreds of hours of employee volunteer time and sponsoring the official Decathlon photographer for the event. The company also hosted a sustainability workshop on Oct. 17 presented by its “green” crusader, Paul Westbrook, as well as a breakfast for competing students.
Woodhead Industries supplied Brad prodocts for the University of Waterloo’s Midnight Sun IX solar powered race car.
In other news, a solar powered race car from a university team is receiving a boost from Woodhead Industries, a sponsor of the University of Waterloo’s (Waterloo, Ontario, Canada) Midnight Sun IX solar powered race car team. The company provided its Brad products for the solar powered race car.
The Midnight Sun IX team will participate in the Panasonic World Solar Challenge from Oct. 21 to 28 in Australia. The challenge is a 3,000 kilometer race (1,864 mi.) that spans the Australian outback, starting in Darwin and ending in Adelaide. Panasonic provides more solar race photos
Panasonic provides more solar race photos.
“The team has a lot of success using the Brad products because of their durability, allowing the solar vehicle to operate under rugged environments like the Australian outback,” says Johnny Yip, a team member involved with the design of this year’s car, as quoted by Woodhead Industries.
Products used included BradConnectivity cabling for DeviceNet
DeviceNetand 4-pole Micro-Change cables, as well as Molex connector sockets. Midnight Sun IX uses DeviceNet for the on-vehicle network allowing devices such as the motor controller and the drive control unit to communicate with each other.
Yip, a computer engineering student at the University of Waterloo and one of 100 students who were involved with the design and construction of the Midnight Sun IX, points out, “one great advantage is the product’s screw-in type connector. This provides extra robustness to our electrical connections when subjected to vibration on the road.”
Control Engineering News Desk
Control Engineering News Desk
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
- Survey Prize Winners
- CFE Edu
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey