Stuxnet as precision weapon

Cyber rifle-shot at Iran’s nuclear program emerges in greater detail, but who pulled the trigger?

01/18/2011


Now that there’s been some time to investigate the Stuxnet story in greater detail, the message that this bit of malware was a weapon is emerging more clearly. There are still gaps in the narrative, but official statements recently say that it set Iran back by at least two years, mostly by running centrifuges out of control until they crashed. Moreover, Iran will have to replace much of its control equipment, or it can never be sure that all traces of the worm have been eradicated.

I got an email yesterday from someone who used to work for Siemens, that pointed me to a story in the NY Times on the same topic. It goes into much greater detail and says, for all practical purposes, that the U.S. and Israel created the worm to use on Iran. If you read well into the lengthy story, it takes us back to Siemens’ user group meeting in Chicago in July 2008, and brings up the fact that Siemens and Idaho National Labs did a session on cyber security and the vulnerabilities of control systems.

If you’re a big fan of conspiracy theories, the article would not stop you from thinking that just maybe Stuxnet’s designers got their idea from that session, and found the specific vulnerabilities they needed as a result of INL’s testing. Conclude what you will, but that idea seems pretty far-fetched. Siemens’ presentation was no different than you could hear at any number of user groups, and INL/CSSP has done testing on all sorts of industrial systems. Responsible people and organizations that discuss cyber security issues are universally dedicated to avoid publicizing specific vulnerabilities, and they do not glorify hackers. You could also find similar information in dozens of articles here at Control Engineering. (See below, or search on “cyber security.” You’ll have plenty to read.)

Maybe I’m missing something, but it seems to me that one practical moral of this story is that as sophisticated as Stuxnet is, some very simple technical and procedural precautions, that should be part of even the most basic cyber security program, would have protected you from all but the most determined and deliberate infiltration of your plant by someone bent on inserting this malware in your networks. And, if you feared that potential, Siemens did offer tools to make your systems more resistant to attack.

If you don’t have such precautions in place, it’s time to work on that before Stuxnet 2 (or 3 or 4 or 5…) makes its first appearance. How and when that might happen is anybody’s guess, except for the people who are creating it. Or maybe we should say creating them. I doubt there is only one in the works.

Also read Securing Legacy Control Systems.

Check out the Garrettcom Cyber Security eGuide for a collection of related articles.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me