Study shows HART protocol leads in communications

A five-year study by the ARC Advisory Group revealed that 32 million devices--a total of 46 percent--use the HART communication protocol.

08/08/2011


According to a recent market study released by the ARC Advisory Group, 46 percent of all field devices installed worldwide at year-end 2010—32 million devices—communicate using the HART Communication Protocol. This is the largest market share of any field communications protocol—larger than all other fieldbus devices (Foundation fieldbus, Profibus and other all-digital), proprietary protocols and 4-20 mA (analog/non-smart) combined, ARC said.

The ARC study estimates that the number of installed HART-communicating devices will grow to 35 million in 2011 and projects growth to continue to 37.3 million in 2012.

“Users worldwide are sending a clear message to industry suppliers by purchasing and deploying HART-enabled products in such overwhelming numbers,” said Ron Helson, executive director, HART Communication Foundation. “Users choose HART Communication because it is a simple, reliable, secure, low-risk, feature-rich and cost-effective intelligent communication protocol that delivers significant value during the entire plant life-cycle. HART is the field-proven global standard and its use will continue to increase for the foreseeable future.”

The ARC study includes a five-year market analysis and technology forecast of pressure transmitters, representing the largest product segment of field devices. The Pressure Transmitter Worldwide Outlook projects that the market for HART-enabled pressure transmitters will continue to grow and is expected to represent nearly 73% of all transmitters shipped this year. A comparison with the 2005 study shows that HART Communication is the only communication technology that significantly increased its share of the pressure transmitter market.

“What we see today confirms our projections. HART continues to have the largest share of the market, which includes fieldbus, conventional, proprietary and all other types,” says Wil Chin, ARC Research Director. “Rather than see level off, we see strong, continued growth for HART with proprietary and conventional decreasing and fieldbus gaining slightly.”

www.arcweb.com

www.hartcomm.org

- Edited by Chris Vavra, Control Engineering, www.controleng.com

Also see:

http://www.controleng.com/channels/product-research.html

http://www.controleng.com/new-products/industrial-networks.html

http://www.controleng.com/channels/process-control.html



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me