Steel lathe chuck shields
Lathe chuck shields provide a safeguard between individuals and point-of-operation or rotating hazards, and protect individuals from flying chips, sparks, coolant, lubricant, and other particles.
Lathe chuck shields provide a safeguard between individuals and point-of-operation or rotating hazards, and protect individuals from flying chips, sparks, coolant, lubricant, and other particles. The shield hinges left and rests at a 30-deg angle above the headstock, making it easy to change the chuck or workpiece. The operator doesn’t need to reach over the chuck to move the shield in and out of position. The front portion of the shield can also be hinged up to change the workpiece. These shields comply with OSHA and ANSI safety standards for lathes.
Danray Products LLC
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey