Standards for robotic safety Webcast: Your questions answered

Webcast presenter Carole Franklin, the director of standards development for the Robotic Industries Association, answered additional questions about robotic safety that were not addressed in the Sept. 29 webcast.


Webcast presenter Carole Franklin, the director of standards development for the Robotic Industries Association (RIA), answered additional questions about robotic safety that were not addressed in the Sept. 29 webcast. Courtesy: RIAWebcast presenter Carole Franklin, the director of standards development for the Robotic Industries Association, answered additional questions about robotic safety that were not addressed in the Sept. 29 webcast.

Question: The new ISO/TS 15066:2016 is working in what region?

Answer: Currently, the ISO/TS 15066:2016 is available for use worldwide as an ISO document. Each country's national standards body can decide whether or how to sell it, and can choose to adopt it as a national standard document. Some countries have even adopted parts of this Technical Specification as a regulation.

In the U.S., the national standards body is ANSI, the American National Standards Institute. ANSI is the U.S. member of ISO, the International Organization for Standardization. RIA is an ANSI-accredited standards development organization (SDO) in the area of robotics standards. We administer the ANSI robotics standards committees under the designation R15.

Currently in the U.S., RIA and the ANSI R15 committees on robotics standards are working toward adopting the ISO/TS 15066:2016 as an ANSI-registered U.S. Technical Report. Under the ANSI system, there is only one type of supplemental document, the Technical Report, while ISO allows two types, the Technical Report and the Technical Specification. This is why, although the ISO version is a Technical Specification (TS), ISO/TS 15066 is planned to be adopted in the U.S. as a Technical Report (TR).

Note: If you are located outside the U.S., you can learn about your country's ISO member through this link. If your country is shaded blue, orange, or bronze, you can hover over your country and the name of your national standards body will pop up. Contact this group to learn more about how to obtain the ISO/TS 15066 in your country. This group may also be able to tell you of any plans to adopt the TS 15066 as a national standard or regulation in your country.

Q: Can you refer to any safety standards for mobile robots in particular?

A: Mobile robotics is a hot topic that is currently in need of an integrated standard. This is why we at RIA have recently started up a new standard drafting committee on industrial mobile robot safety, the R15.08 committee. Right now, the R15.08 members are exploring existing standards that may be relevant, and identifying areas of overlap, gap, or inconsistent guidance. Among others, the two main standards we are studying are: B56.5 on safety of automated guided vehicles (AGVs) and R15.06 on industrial robot safety. Until the integrated standards document is ready, these two standards are a good place to start.

Note: For non-industrial applications, there is also an ISO safety standard for personal care robots, which may be mobile. This is the ISO 13482:2014.

At our next R15.08 committee meeting in October 2016, we hope to come away with an agreed scope and a draft workplan leading to publication of an integrated standards document on mobile robot safety.

Q: Is any effort being made to simplify and shorten the safety standard to make compliance easier (and help less skilled or financially challenged end users)?

A: When we are talking about a safety standard, our paramount goal must be to create a working environment that keeps people safe while getting the job done. We have to be sure that we do not simplify and shorten the guidance to the point that we miss some critical nuance in the complex systems of a robotic work cell. Also, we need to avoid prescribing a specific brand or model of equipment, or writing the standard such that only a certain safeguarding technique would be acceptable. Doing so would inhibit future innovation.

Standards development efforts depend on full and open participation by a variety of interests—users, producers, integrators, academics, government researchers. We wouldn't get that full and honest cooperation if one company or interest group felt that the standard was being written to benefit someone else. However, we also want to avoid complexity itself being a barrier to adoption of the standard. Because we believe that compliance with the R15.06 standard helps improve industrial safety, we want it to be as widely adopted as possible. 

Q: Is there any normative for end effectors for collaborative robots?

A: Guidance for end-effectors is another hot topic. That's why ISO TC 299 –Robotics/ WG 3 – Industrial Safety (the ISO group that wrote the 10218 standard), is currently working on an ISO technical report on the safety of end-effectors. This document is expected to be published in early- to mid-2017.

The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Welding ergonomics, 2017 Salary Survey, and surge protection
2017 Top Plant winner, Best practices, Plant Engineering at 70, Top 10 stories of 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Setting internal automation standards
Knowing how and when to use parallel generators
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me