Spoon-feed radical change

Industrialist Charles Kettering said, "The world hates change, yet it is the only thing that has brought progress." Sometimes, to temper the anxiety and apprehension associated with change, it must be carefully and tactfully motivated.


Industrialist Charles Kettering said, "The world hates change, yet it is the only thing that has brought progress."

Sometimes, to temper the anxiety and apprehension associated with change, it must be carefully and tactfully motivated. If an idea is hard to accept steps can be taken to smooth the way.

Engineering Project Manager Floyd Robertson could testify to this from personal experience when he decided to assign Bill Garvey the Labor and Materials Cost Assessment to determine the feasibility of adding a wing to Plant Warehouse C. The report, when complete, would be reviewed not only by Robertson, but also by Plant Engineer Harold Cross and ultimately by the president of the company as well.

Garvey's negative reaction was apparent from the moment the subject was broached. A bright young engineer, it would represent a career milestone for him and an opportunity for excellent exposure to his superiors. But Garvey didn't view it that way. He saw it as a worriesome first. He had helped prepare important reports in the past, but never had been assigned primary authorship and responsibility. If he failed it would be a big setback.

The young engineer confronted Robertson with a variety of excuses and reasons why he would be better served to assign someone else to the job. The manager understood his anxiety but felt it was a hurdle that had to be overcome as part of Garvey's education, development, and eventual advancement. The challenge lay in changing his mindset.

Question: What motivational strategy would you suggest that Robertson adopt?

Berger's advice: Robertson wisely discussed the problem with his boss, Plant Engineer Norman Berger.

"You identified the objective correctly," Berger replied, "as doing something to alter Garvey's mindset. Accepting primary responsibility for a project of this magnitude would be a formidable first for him. Instead of hitting him head on with the challenge, it might smooth the way if you spoon fed it to him."


"By easing him into it a step at a time. Send him to Warehouse C to look into the situation. Then discuss it with him informally. Get his opinion on various aspects. Familiarize him with the project. Get him interested in it. After a week or so of exposure, my guess is he'll be a pushover to take over that project."

The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me