Someone should buy Boxee before they spoil the soup

Boxee and its partner Hauppauge have been making a lot of noise recently about the pending petition before the FCC to allow the encryption of the basic cable tier. As I monitor all things related to All-Vid and CableCARD, I have been watching the interchange with amusement for the last few weeks. However, I was surprised today to see the trade press covering this shouting match.

02/09/2012


IMS research: excellence in market intelligneceBoxee and its partner Hauppauge have been making a lot of noise recently about the pending petition before the FCC to allow the encryption of the basic cable tier. They have even succeeded in provoking the NCTA and several cable companies into a debate on their terms. As I monitor all things related to All-Vid and CableCARD, I have been watching the interchange with amusement for the last few weeks. However, I was surprised today to see the trade press covering this shouting match.

The big benefit of basic tier encryption is that it will allow cable companies do electronic disconnections and reconnections instead of the physical disconnections and reconnections that they currently do. It also greatly simplifies the management of data services. In other words, no more waiting for the cable guy – just get your boxes and plug them in. The potential savings for cable companies and time savings for consumers is immense.

The downside is that a set-top box will be required for every TV on a cable network.

A little “back-of-the envelope” analysis will make it very clear that the entire value of Boxee far less than the savings the Comcast alone would realize from this change, much less the US economy as a whole.

  • Boxee is a company that has raised $26.5 million in venture capital, meaning that its total valuation can’t realistically be above $250 million and is probably less than half of that.
  • Comcast has 22 million subscribers … assuming a low 10% churn rate, that means 2.2 million truck rolls – which cost at least $100 apiece on average. Where basic tier encryption has been implemented (RCN in New York City), roughly 3/4ths of those truck rolls are eliminated – that’s $165 million worth of annual cost savings to Comcast alone. The value of this decision to Comcast is therefore easily above $500 million in net present value terms.

In other words, the part of Boxee’s business model that relies on unencrypted cable simply isn’t worth saving. Instead, its time for some extremely creative destruction. That Boxee could be side-lined by developments in technology is a risk that its venture capital backers were fully aware of when they made their investments.

What’s in it for the “average American”:

  • Not waiting for the cable guy – According to a IBOPE Zogby poll, the average American consumer lost $250 worth of work and productivity last year waiting at home for service calls – for a national total of $38 billion
    • Instead, self-install will become the norm.
    • Lower Prices – While it won’t be immediately obvious, the fact of the matter is that the United States is the most competitive mature pay-TV market in the world. Similarly, cable companies do also face competition for broadband. Some of their savings will therefore be passed on in the form of lower TV, Broadband, and Telephony prices.
    • The Other Stuff – The cable companies are also touting “less traffic” and “less greenhouse emissions”, and those are true too, even after taking in to account the small power consumption of added set-top boxes compared to the power consumption of a van engine.

While I am relatively confident that the FCC is aware that this proposal will eliminate a massive amount of waste and cost in cable system maintenance and will therefore side with the cable companies, I simply wanted to point out that the “even-handed” coverage of this issue in the trade press simply doesn’t stand up under even the most cursory analysis.

IMS Research is closely monitoring the progress of cable basic-tier encryption as it will likely have a massive effect on the timing and size of the DTA (Digital Transport Adapter) market.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me