Some fluorescents given 2-year reprieve

The Dept. of Energy has post-poned the "phase-out" date to July 14, 2014, for three T-8 general-service fluorescent lamps (GSFLs) after exception requests were filed by three companies.

05/07/2012


Responding to three individually filed exception requests, the U.S. Dept. of Energy (DOE) has postponed by two years – to July 14, 2014 – the “phase-out” date for 700-series T-8 general-service fluorescent lamps (GSFLs) manufactured by GE Lighting (GE); OSRAM SYLVANIA, Inc. (OSI); and Philips Lighting Company (Philips). Only companies that have been excepted by DOE may continue to manufacture or import the T-8 GSFLs in question beyond July 14, 2012. The lamps involved are the 4-foot medium bi-pin, 2-foot U-shaped, 8-foot Slimline, and 8-foot high-output 700-series T-8s. 

DOE’s Office of Hearings and Appeals (OHA) granted the extensions to GE, OSI, and Philips, all three of which are National Lighting Bureau sponsors. The basis for the exceptions was the growing scarcity and escalating cost of the rare-earth oxides used to manufacture the phosphors intrinsic to the proper functioning of fluorescent lamps. The severe supply/cost difficulties have been caused by manufacturing and export regulations subsequently instituted by China. According to the DOE OHA ruling, “China now controls approximately 97% of the world-wide supply of rare earth elements and rare earth oxides, and has adopted policies that have drastically reduced the volumes of rare earth elements and oxides that can be exported to U.S. lighting manufacturers.” 

The impact of China’s rare-earth market manipulations is underscored by a National Electrical Manufacturers Association (NEMA) report that world prices for terbium increased at an annual rate of more than 400% in 2011; for europium oxides, the 2011 escalation rate exceeded 500%. 

According to National Lighting Bureau Chair Howard P. Lewis (Lighting Alternatives, Inc.), the Illuminating Engineering Society of North America’s (IES’) representative on the Bureau board of directors, had the 700-series T-8 phase-out been allowed to take effect on July 14, 2012, 800-series T-8s would have been among the most logical alternatives. The cost of 800-series T-8s exceeds that of 700-series T-8s because the rare-earth content of 800-series T-8s significantly exceeds that of 700-series T-8s. Mr. Lewis observed that, “This ruling enhances affordability at a time when it’s needed. We applaud DOE for its good judgment, and GE, OSI, and Philips for seeking the exceptions.” 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.