Solar industry grows, but future may not be so sunny

04/01/2009


 

According to a New York Times article , solar energy capacity in the United States grew by 17% in 2008, according to preliminary report released by the Solar Energy Industries Assn . (SEIA). The recession has dried up the financing for many projects, but 2008 showed growth for a third consecutive year.

The report notes that 1,265 MW of solar power of all types were installed in 2008, bringing total U.S. solar power capacity up 17% to 8,775 MW. The 2008 figure included 342 MW of solar photovoltaics, 139 MWTh (thermal equivalent) of solar water heating, 762 MWTh of pool heating, and an estimated 21 MW of solar space heating and cooling.

Rates of growth beat 2007 as well, with the grid-tied PV segment leading with a growth rate of 81% for the amount of installed power in 2008 (292 MW) over the amount installed in 2007 (161 MW). Solar water heating installation grew at a 50% rate in 2008 (139 MWTh) over 2007 (93 MWTh), and pool heating growth slowed by 3% in 2008 (762 MWTh) from 2007 (785 MWTh).

States that led in grid-tied PV installation were California (178.6 MW), New Jersey, (22.5 MW), Colorado, (21.6 MW), Nevada, (13.9), and Hawaii (11.3 MW). For solar water heating systems, Hawaii led states, installing 37% of the total U.S. systems in 2008, followed by Florida (20%), California (7%), Colorado (5%), and Arizona (5%). The Mid-Atlantic States installed 7% of solar water heating systems.

Several states added or expanded incentives or requirements for solar energy, including California, Hawaii, Maryland, Massachusetts, Missouri, and Ohio.

To date, 28 states have renewable portfolio standards that require a certain amount of energy be generated from renewable sources, with 19 of these states mandating that a portion come from solar or distributed sources. A total of 42 states and the District of Columbia now have net metering rules allowing owners of solar energy systems to sell excess electricity back to the grid.

The solar power industry received an enormous boost from provisions in last year’s bailout bill and this year’s Stimulus Package. The SEIA reported that the Stimulus Package contains 19 different provisions for aiding solar power. However, according to the SEIA, solar developers and manufacturers need more policies designed to help an industry struggling against a recessed economy. National policies like a national renewable electricity standard would require the country to get a certain percentage of its electricity from renewable power. The solar industry continues to lobby for a “solar carve-out” in the policy, which would mandate that a percentage of those renewables come from solar power.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me