Solar industry capital expenditures set to rebound as emerging economies boost production

IHS reports that the solar industry will rise by 30% to $3 billion in 2014 because of increased sales in emerging economies in South America, Africa, and the Middle East.

09/10/2013


The sun is finally rising on the global solar business, with growing demand in developing regions helping to ignite the first increase in industrywide capital spending in three years in 2014, according to the PV Manufacturing & Capital Spending Tool from information and analytics provider IHS.

Global capital spending by producers of photovoltaic (PV) modules, cells, ingots, wafers and polysilicon is expected to rise by 30% in 2014 to reach $3.0 billion. This will mark the first time that expenditures have increased since 2011, when they grew 8%, as presented in Figure 1.

The projected growth will bring to an end a two-year period when spending dropped—by a stunning 72% in 2012, and by an anticipated 36% this year in 2013. During this period, PV industry capital spending will plunge by a gut-wrenching total of $10.6 billion, falling to $2.3 billion in 2013, down from $12.9 billion in 2011.

Solar industry players engage in capital spending in order to purchase manufacturing equipment and facilities used to produce PV raw materials or products. Spending has fallen in recent years because of massive overcapacity and oversupply, which has sent prices down throughout the supply chain.

However, a sustained increase in capacity from emerging economies is set to spur the 2014 recovery.

“South America, Africa and the Middle East now are leading the world in solar capacity additions—and they also are leading the capital expenditure segment of the PV business out of its slump,” said Jon Campos, solar analyst at IHS. “The overcapacity in PV production mainly has been concentrated in the developed solar regions of the United States, European Union and China. But as demand expands in new areas, PV manufacturers are gaining interest in producing their wares in these regions, resulting in new factory openings and boosting local capital spending.”

Dawn arrives for solar spending in emerging economies

After going up 23% in 2013, solar capital spending in emerging economies is expected to rise in the low 40% range for every year through 2017. In contrast, following zero growth in 2013, the established markets are expected to shrink by 5% to 10% during every year through 2017, as presented in Figure 2.

Among all the emerging economies, the largest percentage increase in capacity is occurring in South America, Africa and the Middle East.

Emerging markets account for 7.9 GW of the world’s total announced capacity for PV materials and products from ingots through modules, with the potential to climb to nearly 11 GW by 2017. Capital investments for the foreseeable future will largely remain in the areas of crystalline wafer production, cell and module equipment. 

Ending capital punishment   

The expected increase in capital spending comes as a welcome and long-anticipated change from the dismal conditions that have plagued the market in recent years. The solar shakeout has peaked and an inevitable return to reinvestment in equipment and technology is due in the near term.

“Our research is showing a return to market equilibrium with regard to supply and demand,” Campos said. “Overcapacity seems to be correcting itself, and from the last few financial announcements, a handful of solar companies have returned to profitability and widened margins. The last piece of the recovery puzzle is capital spending and investment in high-efficiency technology.” 

Spending spree

Beyond the rise in demand from emerging countries, other factors are contributing to the recovery in capital spending.

PV suppliers are engaging in new technology upgrades in order to enable higher efficiency and lower dollar-per-watt production costs. Equipment is also critical in allowing PV manufacturers to differentiate their products. Such differentiation can improve profitability and margins.

Current and potential trade conflicts concerning Chinese PV products could drive production to other locations, such as South America, Southeast Asia, Africa and the United States. In particular, U.S. states like Mississippi and Michigan are attractive regions for PV production because they provide cheap electricity and affordable land to manufacturers.



Cleverick , Non-US/Not Applicable, Jamaica, 10/11/13 11:11 AM:

Very informative
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me