Software for vibration testing

The VIBpoint Framework V3.0 by Data Translation uses dynamic signal acquisition (DAQ) and provides continuous or burst DAC output of noise, swept sine, and fixed frequency waveforms.


The VIBpoint Framework V3.0 by Data Translation uses dynamic signal acquisition (DAQ) and provides continuous or burst DAC output of noise, swept sine, and fixed frequency waveforms. Courtest: Data TranslationData Translation Inc. released the VIBpoint Framework V3.0. The new version of the software provides tools to output stimuli with waveform generation. The VIBpoint Framework application, combined with DT dynamic signal acquisition (DAQ) devices, provides a complete vibration testing solution. The software is navigated through a series of easy-to-use configuration windows, allowing flexible selection of the desired acquisition, processing, plotting and display parameters.

New waveform output features include the following: 

  • Continuous or burst D ac output of noise, swept sine and fixed frequency waveforms
  • Synchronize output start/stop with analog input, or start/stop manually
  • Specify waveform on/off time and ramp up/ramp down time
  • Lock total waveform duration to analysis frame time (triggered), or total acquisition time (free run)
  • Specify waveform peak voltage and offset. 

Fixed Frequency options include:

  • Output frequency value
  • Sine, square, ramp or triangle wave
  • Continuous, burst, or repeat burst output 

Swept Sine options:

  • Start/end output frequency values
  • Single sweep or loop
  • Linear or Log frequency change

Noise options:

  • Random, Random Normal, or Pink noise
  • Continuous, burst, or repeat burst output
  • True random or Pseudo random noise

Potential users can download a full-featured beta version timed to expire on September 7, 2012, by visiting this link.

Data Translation Inc. 

- Edited by Chris Vavra, Control Engineering, 

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.