Social experiment update

Last February I announced in this column the launch of Control Engineering’s first social media foray—the “Automation & Control” group on Facebook (http://budurl.com/2nfe). As we began this experiment, there were already several other such automation-related groups on Facebook hosting anywhere from several dozen to a few hundred members.

07/01/2009


Last February I announced in this column the launch of Control Engineering ’s first social media foray—the “Automation & Control” group on Facebook ( budurl.com/2nfe ). As we began this experiment, there were already several other such automation-related groups on Facebook hosting anywhere from several dozen to a few hundred members. At the time I thought that if we could reach 500 members, that would be an excellent result. We passed that benchmark in less than month. Membership in the group had surpassed 2,100 by June 1 (less than six months since the launch).

The big questions we had when launching this venture was: How many engineers are out there on Facebook, and how much time are they spending there? The answers have been quite clear. Not only are there a lot of engineers using social media, they’re out there looking for answers. Here’s a sampling of some of the questions posted recently on the group site—from the more common to the more specific:

  • Can I use an incremental encoder direct connect to relay as a sensor? If so, how should I connect it?

  • When it comes to electromagnetic interference, which is best, Profibus or 4-20mA?

  • I’m looking for a cement flow meter. I need it to measure cement powder flow across a 16-in diameter steel pipe.

  • I need to find a machine/system that counts sausage chubs, possibly holding them until a predetermined amount have gathered, then dumped into a box. I have seen systems that do this with cartons, but does anyone know of a system that can do what I need with scattered chubs?

There are literally dozens and dozens of user posts and replies on the site. So if you haven’t joined yet, I encourage you to do so. There’s a vast engineering community out there that could be even better with your presence.

The success of this whole social media venture has also led us to also launch a Twitter feed on sustainable engineering ( twitter.com/djgreenfield ) and a companion site to the Facebook group on LinkedIn ( budurl.com/8w6g ). The LinkedIn group site—“Automation & Control Engineering”—also features a direct news feed from www.controleng.com , so you can keep up to date with industry news while also dialing into the engineering community at large. More social media news is coming soon to coincide with an update of the www.controleng.com Website.

Now that these ventures are up and running, I am interested to hear your comments and suggestions on how we can make them better and more useful for you. My email address is below.

david.greenfield@reedbusiness.com

Twitter

 

ONLINE extra

At www.twitter.com/ControlEngTips , Get a Control Engineering tip of the day via Twitter on controls, automation, instrumentation, sensors, networks, system integration, and related trends and technologies found at www.controleng.com. Mark T. Hoske, Control Engineering editor in chief, assembles the tips.

See a streamlined view of the Control Engineering site for handheld computers at mobile.controleng.com .





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me