Six ways to build a manufacturing culture from the bottom up

Companies need to establish an environment and culture where workers are just as active in creating a positive, safe environment as the executives and managers. Consider the six tips below to get started.

10/12/2016


Image courtesy: CFE MediaAny discussion of process improvement on the assembly line inevitably turns to the Toyota Production System, and for good reason. According to some reports, Toyota receives more than one million operational improvement ideas from employees every year and implements 90% of them. It's a critical component of The Toyota Way.

The impact that this approach can have on a company's production environment and lean manufacturing initiatives is clear, but the benefits also extend beyond the factory floor. Giving front-line employees a voice in the improvement process can help build a manufacturing culture that excels at problem-solving, encourages innovation, and fosters job satisfaction. That in turn can have a positive effect on business performance, worker retention and organizational strength.

The key is to establish an environment where workers on the front line are not only on the lookout for potential improvements but also have confidence that their ideas will reach receptive ears. Here are a few strategies for setting the stage.

1. Stress continuous improvement.

Even if your company has not implemented a formal continuous improvement program like Lean, six sigma or total quality management, it's good to encourage employees to share their ideas to work better and faster in a variety of ways. Start by stressing the value you place on grassroots recommendations. Use every communication channel at your disposal to get the message across and make sure the managers are on board.

Also, be proactive rather than simply waiting for ideas to roll in. Challenge teams with a specific issue, then break out into small cross-functional groups to brainstorm a list of possible solutions, and then let them test their suggestions until they find one that works. Set strategic improvement targets with deadlines for suggestions for achieving them. Approaches like these will also help keep the campaign alive.

2. Keep beating the drum.

Too many efforts at creating a collaborative culture die on the vine because they aren't sustained properly. Repetition is key. In addition to seeking contributions through focused activities, as just discussed, adopt a clever theme or slogan that can be instantly associated with the campaign. (One company used E2B2 — "Everyone, every day, getting better and better.") Use it to solicit ideas in daily, weekly, bi-weekly and/or monthly meetings with the manufacturing teams. Bring the topic up in standup meetings on the plant floor, company newsletters, all-company meetings, and other forums. Include reminders on company bulletin boards or in paychecks.

3. Create mechanisms for idea collection and approval.

When front-line workers at Toyota identify a work problem as well as a potential solution, they refer their idea to a quality circle of peer workers. If it passes muster, it is shared with their manager. Suggestions approved at that level are forwarded to upper-level managers, who can then give a thumbs up or thumbs down. Whether you adopt a similar approval chain for vetting employee improvement ideas, be sure to implement some kind of idea collection and approval system. Otherwise valuable employee suggestions for improving productivity, cutting costs, or otherwise boosting the bottom line may get lost in the shuffle.

4. Foster a team mentality.

Nowhere does the principle that two heads (or 20) are better than one apply more than in a manufacturing environment. That's why teamwork is a cornerstone of the culture at companies like Toyota, which nurtures camaraderie through regular group bonding activities. These kinds of team-building exercises can help foster cohesiveness, increase motivation, promote communication among people in different groups who don't know each other well, and build problem-solving skills that carry over to the real-life manufacturing environment.

They can be fun, too. At one manufacturer, exercises ranged from constructing the tallest standing skyscraper out of spaghetti and tape to a group game about shop floor procedures facilitated by an app on employees' cell phones. But forget paint ball and obstacle courses; focus instead on activities that require group communication and cooperation.

5. Recognize successes and the people behind them.

Showcasing positive results from employee improvement ideas not only boosts morale but also keeps the company's interest in worker input in the spotlight. Recognition methods range from newsletter kudos and Employee Appreciation Week programs to meetings where department heads share major individual or group contributions that had measurable results.

Camcraft, a maker of precision automotive and hydraulic controls components, uses quarterly meetings to recognize all of the people who made an improvement in the plant in the previous three months. And at healthcare giant Kaiser Permanente, the CEO writes a letter to all 180,000 employees every Friday afternoon celebrating a performance improvement, some great research, or a new award of that week. It's not a manufacturing company, but the principle is the same.

6. Keep it fresh.

Even the best ad campaigns need to change periodically to grab attention; the same is true with continuous improvement communications. To stimulate new cost-cutting ideas a few years ago, for example, my company rolled out a "net driver" program complete with a logo, a race car-shaped tins of mints, a NASCAR-inspired hat, and "net driver" mugs presented to each employee whose suggestion gets used. The program yielded a 23% increase in net profits over the first 12 months and continues to generate new savings.

Employees on the front lines see improvement opportunities that managers won't, because there are several degrees of separation between them and the hands-on production work. They develop a sense of pride when their ideas are implemented. That in turn can enhance job satisfaction, stem the turnover tide that afflicts many firms today, and even increase the appeal to younger jobseekers looking for a more dynamic work environment.

Employee-inspired improvements can also increase competitiveness and strengthen the corporate balance sheet. Those are universal business goals. Employee engagement is a proven path to get there.

Jill Bellak is President of MBX Systems, a designer and manufacturer of custom server appliances and hardware solutions for independent software vendors and service providers worldwide. This article originally appeared in the Association for Manufacturing Excellence (AME) "Target Magazine Fall 2016" issue. AME is a CFE Media content partner. Edited by Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me