Six categories, one big prize: WTG honors manufacturers for game-changing business process projects

A state-of-the-art manufacturing execution system (MES) in use at the historic St. James's Gate Brewery in Dublin gained international recognition at World Trade Group's (WTG) 2008 Strategic Manufacturing Awards. Credited with minimizing on-site waste by 40 percent, driving down utility costs by nearly [euro] 2 million, and bringing raw material costs to [euro] 1.

11/01/2008


A state-of-the-art manufacturing execution system (MES) in use at the historic St. James's Gate Brewery in Dublin gained international recognition at World Trade Group 's (WTG) 2008 Strategic Manufacturing Awards. Credited with minimizing on-site waste by 40 percent, driving down utility costs by nearly [euro] 2 million, and bringing raw material costs to [euro] 1.35 million under budget, the entry from London-based Diageo won the Manufacturing IT award sponsored by Rockwell Automation .

Held in Germany in early October, the awards ceremony saw manufacturing executives from all over Europe—including representatives from Hewlett-Packard, Procter & Gamble, Whirlpool, and Baxter Healthcare—compete in six categories.

“To be shortlisted for the Manufacturing IT award is itself ample recognition that you are on the way to achieving manufacturing excellence,” notes Chris Molamphy, continuous improvement process team leader for the Dublin brewery, where Ireland's creamy dark brown Guinness beer has been produced since 1759.

Manufacturing Business Technology was present on the judging panel, along with Pierfrancesco Manenti, European research director at Framingham, Mass.-based IDC Manufacturing Insights ; and lean manufacturing coach and international author Mark Graban.

In all, more than 100 entries were received, with Lawrence Allen, marketing director for WTG, describing the standard of submissions as “incredibly high.”

Such was the case for Autoglym , a Letchworth, U.K.-based maker of automotive polishes and cleaning compounds, and winner of the Demand-Driven Manufacturing award.

According to Paul Phillips, director of production and logistics, the Autoglym project involved geographically separate product lines consolidated within the headquarters' manufacturing operation to deliver significant productivity and lead-time improvements, as well as an increase in capacity.

Says Phillips, “A small team picked the project up and made it work. The company had invested a lot of money in this part of the business, and the board took a keen interest in how it worked out.”

Similar sentiments were echoed by Bendt Jørgensen of Nordborg, Denmark-headquartered Danfoss , a privately held, 23,000-employee manufacturer of valves, and fluid power and refrigeration components, with 70 factories in 25 countries.

Winning the Operational Excellence award, says Jørgensen, VP and head of the company's lean initiative, “is clear recognition” of the effort that employees made over the past four to five years to boost the company's competitiveness.

The award recognized development and rollout of the companywide Danfoss Business System, a lean manufacturing and supply chain initiative modeled after Toyota's Toyota Production System. The initiative embraces production, purchasing, sales, and product development.

“We did a benchmarking exercise, and saw we were making only half the earnings before tax of the best companies in our peer group,” he explains. “And when we looked in detail as to why this was, we discovered that the way we were working on our factory floors wasn't as smart as the way they were working. Specifically, we were [involved in] activities that weren't adding any value to the customer.”

No laggard, Danfoss had been on a journey of improvement since the early 1980s, when it had first sent employees to Japan to investigate Just-in-Time, Total Productive Maintenance, and similar concepts.



Line-up of excellence: Executives from winning companies take the stage for the World Trade Group 2008 Strategic Manufacturing Awards presentation.

“But these were piecemeal initiatives, not an integrated approach—hence our decision to go for a companywide lean business system that embraces the whole value chain,” Jørgensen explains. “To grow the company, we need to acquire other businesses—but that costs money. By improving our earnings before tax, we're generating that money, as well as making our operations more efficient.”

It's a message that wasn't lost on lean coach and judge Mark Graban.

“Lean success comes not from implementing lean methods, but rather from using lean to meet business improvement goals,” he notes. “Danfoss' results—improving productivity and capacity by more than 30 percent—are impressive.”

Other awards were given to companies with special prowess in green manufacturing, skills versatility, and innovation.

Sponsored by Microsoft, the Innovation award went to machine tool automation specialist Fatronik Tecnalia of San Sebastián, Spain, for its development of a mobile robot intended to drill holes with a high degree of precision in large aeronautical components—such as aircraft wing spars—during the assembly stage.

Already in use at Airbus España , part of Europe's Airbus consortium, the robot is delivering cycle-time improvements of 33 percent, says Hugo Martinez de Lahidalga, projects and markets manager at Fatronik.

The Green Manufacturing award—and the overall Manufacturer of the Year award—went to machine tool maker IDEKO-IK4 . Part of Spain's Danobat group, IDEKO acts as a research center for the group, developing new tools and techniques.


Paul Phillips, director of production and logistics for Autoglym, says the cleaning-compounds maker once had geographically separate product lines, but consolidated within the headquarters’ manufacturing operation to deliver significant productivity and lead-time improvements, as well as an increase in capacity. That consolidation earned Autoglym the Demand-Driven Manufacturing award this year, presented by the World Trade Group.


Working closely with a customer— Kennametal Technologies of Fuerth, Germany—IDEKO created a solution to a perennial problem: the machining of die cast magnesium components, which are conventionally machined under “wet” conditions with cutting oil due to the hazards of fires and explosions when working with the metal. During the machining processes, the tiny particles of magnesium will ignite if not continuously washed away from the cutting face of the tool, explains IDEKO's director of international R&D, Joseba Perez Bilbatua. The problem: disposing of the oil, which is difficult to treat or recycle.

It was for designing hollow cutting tools, new cutting parameters, and a redesigned spindle and tool holder that enabled oil-free “dry” machining that IDEKO won both the awards, explains Tom Boughton, WTG's manufacturing alumni project director.

“The Manufacturer of the Year award represents the pinnacle of manufacturing excellence, and acknowledges the achievements of a single enterprise in taking their business to the next level in competitive manufacturing,” says Boughton.

But for IDEKO, more bankable recognition is forthcoming, reports Bilbatua. The European Commission, it seems, has injected funding to help the company adapt the technique for use with the composite materials used in aerospace manufacturing.

“The aerospace industry potential is very exciting indeed,” concludes Bilbatua.



World Trade Group 2008 Strategic Manufacturing Awards

Green Manufacturing Award (sponsored by Autodesk ) and Manufacturer of the Year Award: IDEKO-IK4 , Spain

Manufacturing IT Award (sponsored by Rockwell Automation ): Diageo , U.K.

Innovation Award (sponsored by Microsoft ): Fatronik Tecnalia , Spain

Operational Excellence Award (sponsored by Atos Origin ): Danfoss , Denmark

Skills in Manufacturing Award: PA Consulting , Germany

Demand-Driven Manufacturer of the Year: Autoglym , U.K.

Special commendation: Bombardier Transportation , U.K.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
The true cost of lubrication: Three keys to consider when evaluating oils; Plant Engineering Lubrication Guide; 11 ways to protect bearing assets; Is lubrication part of your KPIs?
Contract maintenance: 5 ways to keep things humming while keeping an eye on costs; Pneumatic systems; Energy monitoring; The sixth 'S' is safety
Transport your data: Supply chain information critical to operational excellence; High-voltage faults; Portable cooling; Safety automation isn't automatic
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Synchronizing industrial Ethernet networks; Selecting protocol conversion gateways; Integrating HMIs with PLCs and PACs
Why manufacturers need to see energy in a different light: Current approaches to energy management yield quick savings, but leave plant managers searching for ways of improving on those early gains.

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.