Sine amplitude conversion for dc-dc converters
Electronics Weekly columnist Bob Marchetti explains the importance of SAC to help improve energy efficiency and output.
In a column for Electronics Weekly, columnist Bob Marchetti explains how sine amplitude conversion can be used to help improve efficiency for dc-dc converters. He writes how old dc-dc transformers would switch dc into an alternating square wave to produce the required output. The problem was that harmonic components had to be filtered in the process. Too much potential energy, as a result, ended up being lost.
A sinusoidal waveform, by contrast, is more efficient because it is continuously oscillating at a fixed frequency. Conversion efficiency increases to 98% to 99%, contributing to both high power density and reduced thermal management requirements. Radiated and conducted harmonic content is also minimized because of the sine amplitude.
Marchetti believes this adjustment is key for energy regulation, especially in a time when the desire to be more and more efficient while trying to cut down on waste.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.