Simplified Safety: How Effective is Your Company Safety Culture?

Small changes can enable big improvements through safety automation and a more competitive presence in the global marketplace.

03/24/2011


What kind of safety culture does your company have? Is it receptive to the benefits and opportunities new safety automation technologies offer? Does it better position your company to play in today’s global marketplace? Taking time to examine your company safety culture—and taking steps to create a fertile environment more conducive to change—can reap significant benefits.

Your safety culture may not be doing all it can to foster improvements and adopt new technologies for a number of reasons. First, the Occupational Safety and Health Administration (OSHA), through what many term its “rearview mirror enforcement” and qualitative regulations, impacts everything safety. It places the burden of creating a safe workplace squarely on the manufacturer’s shoulders. Essentially, the end user must drive safety improvements by making demands on the OEM and requests of the consultant.

Yet this position is almost diametrically opposed to that of Europe, where the European Union (EU) and its Machinery Directive impose compliance first on those who make and/or engineer machines, and only then on the end user. Further, the European safety culture drives most international standards, including and especially EN ISO 13849-1 2008, the now-infamous quantitative-based machine safety standard poised to take effect December 2011 following two postponements. As we become an increasingly global society, it is no wonder such conflicting cultures cause consternation for all.

Becoming an improvement enabler

A bit of attention to U.S. safety cultures and how well they nurture or resist safety system changes might go a long way toward reconciling some of these differences. Indeed, how does a U.S. end user ramp up to comply with European standards such as EN ISO 13849-1 and its complex engineering elements? Although U.S. standards-setting bodies recognize the importance and impact of international standards, no U.S. organization ever adopted EN 954, Safety of Machinery, the previous European machine safety standard about to be de-activated. Instead, the U.S. incorporated some of the concepts of the European standards into its own.

But conflict with foreign values is only part of the story. Other factors play a role in culture formation and change. For one, U.S. industry is steeped in a philosophy of doing things its own way. “It is pride in our way of doing it,” said J. B. Titus, safety consultant and president of J.B. Titus & Associates. “And our way has always been largely successful. We know that a new wave in international standards such as EN ISO 13849-1 is coming, but we still want to do it our way.”

What industry needs, in Titus’ view, is a vision for continuous safety improvement. And that vision can be developed with just a few changes to existing safety culture. “We need to create a shared value concept that includes all employees, from the hourly worker right up through management,” he said. “Operators and managers need to work together to create a safety policy that fosters the use of safety automation technology, especially for companies who play in the global arena. Even suppliers and consultants can help create and develop that shared value concept.”

Further, industry needs to re-direct its training efforts, which have typically focused on operators, rarely on management. “Now management needs training,” Titus suggested. “A lot of managers don’t know about the safety automation technologies available today that enable companies to operate better,” he went on. “Unlike hard-wired systems, safety automation technologies offer diagnostics that can help minimize downtime, facilitate troubleshooting, and do those things that impact OEE and help a company compete globally. Some of this technology can drive companies to do things differently even if local standards don’t require it. Management needs to be brought up to speed on it and become an enabler of these kinds of improvements.”

Building a case for safety automaton technology

Finally, Titus recommends companies consider the compliance lifecycle. What happens to the level of safety compliance in a wired system over time is closely tied to a company’s safety culture. A culture that can ensure continual, failsafe maintenance over the life of a facility’s safety systems might be able to respond to the intensive requirements and demands of a wired system. However, safety automation solutions are unquestionably more flexible and forgiving.

“Although a hard-wired system and a safety automation system are at least equally reliable the day they are commissioned on a machine,” said Titus, “the larger question is what happens over time? Design changes are quick and simple using safety automation technology. They can be programmed into a machine through software. All of the features offered by conventional machine logic, including diagnostics, are now available to a safety system. Safety automation is critical today because manufacturing can’t afford to do anything that isn’t optimally efficient or reliable.”

Companies today need to understand the influence their safety culture has on safety practices and systems, acknowledge the role management plays in implementing safety changes, and develop an environment that will enable—not resist—change and the adoption of best practices and technologies.

“How safety is approached in Europe by the Machinery Directive is not the same as how it is approached in the United States through OSHA,” said Titus. “It never will be.” So companies need to take a look at their corporate safety cultures to see what they might do to make them more responsive to all kinds of situations and keep their safety systems and programs current, dynamic, efficient, and, where applicable, competing successfully in a global environment.

Studies show that many machinery manufacturers(OEM’s) have been able to eliminate hundreds of hours of shop time from the time needed to make their machines and reduce debug and start-up time significantly by adopting new technology safety automation, said Titus. “It has given them the distinct advantage of reducing product price or increasing product volume, or some of both.”

With a few small changes to your corporate safety culture, maybe you can too!

J.B. Titus, CFSE, is president of J.B. Titus & Associates, Solutions for Machine Safety, Duluth, GA. Contact him at jb(at)jbtitus.com or visit the website at www.jbtitus.com.

 

For more information on safety automation related products, visit the Siemens Industry website at www.siemens.com.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me