Servo drives to debut at IANA

Elmo Motion Control will exhibit its Gold Twitter and Gold Drum HV servo drives at Industrial Automation North America (IANA) at IMTS in Chicago, Booth E-4971, September 8-13, 2014.

08/31/2014


Elmo Motion Control will exhibit its Gold Twitter, a tiny, but high-power servo drive at Industrial Automation North America (IANA) at IMTS in Chicago, Booth E-4971, September 8-13, 2014. Weighing at just 18 g and less than 13 cm3 in volume, the Gold Twitter is designed to deliver up to 4000W of qualitative power, ultra high current of 50A/100V with advanced servo capabilities and support for EtherCAT and CANopen fieldbus communication standards for deployment in any industrial application. Gold Twitter is compliant with international safety and EMC standards. In addition, the Gold Twitter is mountable, and it incorporates Elmo's proprietary FASST, (Fast and Soft Switching Technology) resulting in >99% efficiency with negligible EMI.

Elmo Motion Control will exhibit its Gold Twitter and Gold Drum HV servo drives at Industrial Automation North America (IANA) at IMTS in Chicago, Booth E-4971, September 8-13, 2014. (Pictured: Gold Twitter) Courtesy: Elmo Motion ControlElmo's Gold Drum HV will also be debuting at IMTS. The Gold Drum HV is a compact high voltage servo drive that delivers up to 65000W of continuous power and runs optimally on any servo motor, supporting "any feedback" sensor in single, dual, and gantry loop configurations. Both can be set up and tuned using Elmo Application Studio II (EASII) software, which will allow them to operate as a single or multi-axis control solution in a distributed configuration real-time network.

CFE Media will sponsor the 2014 Global Automation and Manufacturing Summit on Sept. 10 starting at 8:15 a.m. in Room W190 in the West Wing of McCormick Place.

Click here to register for the summit or for IANA.

To learn more about IMTS, the IMTS 2014 Conference, and to register, visit IMTS.com. Conversations within the IMTS community are going on at:

Twitter: https://twitter.com/IMTS_2014 or @IMTS_2014

LinkedIn: http://www.linkedin.com/groups/IMTS-2014 

Facebook: https://www.facebook.com/IMTS.show



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me