Schneider study: Execs see energy as business, moral imperative

Energy efficiency is more than a business driver; it is a moral imperative, according to the results of a recent Harris Interactive Poll commissioned by Schneider Electric.

03/14/2011


The independent survey of over 300 senior executives at Fortune 1000 companies sought to understand executive attitudes towards energy efficiency. The study revealed that while three-quarters of all executives reported the importance of saving energy increased in their organizations over the past two years, the bottom line still prevails when making decisions to implement enterprise-wide programs.

Of the Fortune 1000 senior executives surveyed, 88% feel business has a moral responsibility, beyond regulatory requirements, to make their companies more energy efficient. At the same time, 61% of respondents say that potential cost savings are their biggest motivator to save energy at the enterprise-level, outranking environmental concerns (13%) or government regulations (2%).

Potential savings were cited by 61% of executives as the key driver in making their organizations more sustainable, stating that their companies would be motivated to use less if there was an energy management solution that could save them money. Cost savings was by far the most widely cited factor among the executives, with the remaining respondents reporting the following:

  • Environmental benefits: 13% cited stewardship of the environment to be a main motivator.
  • CEO mandate: 10% said their companies would use less energy if the CEO required it.
  • Education: 7% said if they knew how to reduce consumption, they would change behavior.
  • Increased cost: 7% said that their companies would use less energy if it was a more expensive product.
  • Government regulation: Just 2% of respondents said they would only use less if it was required by lawmakers.

“The findings of the survey reinforce what we’re hearing daily from our customers,” said Christopher Curtis, President and CEO of Schneider Electric in North America. “Business leaders want to be good corporate citizens regarding their energy management, they often just don’t know where to start. At the same time, we’re in the process of emerging from the worst economic downturn since the Great Depression, requiring cost savings to be a key part of the solution. We are beginning to see energy management services become a strategic asset for companies looking to save money.”

A divide on Cap and Trade

The survey also shows near evenly split opinions from executives on the business impact of putting a price on carbon, revealing that there is little confidence that a cap and trade policy will lead to increased sustainability practices among companies. The majority are divided between two beliefs: that cap and trade policies will be ineffective or that they will be effective only if the generated revenues are used in a way that enables companies to be more energy efficient.

  • 40% said they believe cap and trade policies will not result in increased energy efficiency; rather it will likely cause industries to emit the same amount of carbon prior to the policies, and charge more for products in order to cover business costs.
  • 38% believe cap and trade policies will result in increased energy efficiency only if the revenue generated is directly applied to research and development, social programs and initiatives that enable companies/industries to use less energy.
  • 22% believe cap and trade policies will definitely result in increased energy efficiency as it will force industries to adopt energy efficiency technologies and practices to scale back on carbon emissions.

“We as business leaders or government cannot be neutral or indecisive when it comes to carbon management,” Curtis added. “The simple truth is we’re sitting on the sidelines when it comes to devising industry accepted standards and requirements for de-carbonizing our economy. Nothing meaningful is happening, which is unacceptable. The survey shows awareness is increasing, a good first step. The next step needs to be action – putting sustainable carbon and energy management programs in place and taking responsibility for them on a day-to-day basis. This will be a defining factor in our collective success or failure in leaving the world better than the way we found it.”

Harris Interactive conducted the survey within the United States in the fourth quarter of 2010, among a total of 301 Fortune 1000 Executives. Company revenue and number of employees were weighted where necessary to bring them into line with their actual proportions in the larger universe of Fortune 1000 companies.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me