Rockwell Automation puts emphasis on convergence at conference

Automation Fair focus is on plant/IT cooperation

12/02/2008


Rockwell Automation has released results of a new study representing a broad cross-section of manufacturing industries revealing that companies

progressing toward converging their IT and controls engineering organizations are reaping major benefits, including higher efficiency, increased reliability, shorter project timelines and better business continuity. The study, released at Automation Fair in Memphis in November, also found that those with more integration between these functions experience less conflict and are more optimistic about the future of convergence.

The objective of the study, which analyzed responses from more than 300 control engineers and IT/IS professionals, was to gain insight into convergence trends and identify barriers, as well as best practices that companies are using to accelerate the process. The study also supports recommendations outlined in a white paper commissioned earlier this year by Rockwell Automation and authored by analyst firm Industry Directions and consultant firm Systems Innovation Management outlining the potential benefits of IT/Controls convergence.

“These findings confirm many of the performance advantages that we had long suspected come from stronger collaboration between IT and controls departments, and we’ve uncovered a few new ones as well,” said Kevin Roach, vice president of software, Rockwell Automation.

The study identified management involvement as the most influential and effective driver of convergence. In fact, the analysis showed that in more integrated companies, 90% of the respondents indicated that senior management is “promoting change” or is “somewhat involved”. Conversely, in companies where IT and control engineering is less integrated, 40% of the respondents described senior management as “uninvolved in driving change”.

The study also found that those with IT/IS responsibilities tended to be more aggressive toward seeking and initiating progress toward convergence. This correlates with the differences in how the two groups evaluate the advantages of convergence.

According to the results, 67% of IT respondents indicated that convergence had more advantages than disadvantages, compared to only 39% of controls engineers.

The survey also revealed some unexpected benefits of convergence, including improved security; improved visibility across multiple plants; improved disaster recovery; and reduced system complexity due to improved designs. Other findings gave insight on the positive impact that convergence is having on various manufacturing processes and programs. Those initiatives where convergence is showing the most impact include:

  • Information and internet protocol availability and security

  • Lean manufacturing or lean enterprise

  • Real-time manufacturing

  • Total quality programs like Six Sigma

    • “Just as manufacturers realize the strategic importance of integrated information, many are now beginning to realize the need to create an integrated environment where plant-floor and IT functions are managed in a collaborative, synchronized manner,” Roach said. “This converged framework allows teams to better collaborative to assess current manufacturing and IT systems, and begin to set standards for integration, data management and future technology investments.”

      A summary of the study’s key findings is available as a supplement to the white paper titled, “Come Together: IT-Engineering-Manufacturing Convergence Furthers Success”. This paper, released in June 2007, summarizes the conclusions from a series of in-depth interviews conducted with manufacturing and IT professionals earlier this year.

      For a copy of the original IT-Engineering Convergence Whitepaper, please visit: www.rockwellautomation.com/go/converge .





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me