Robot safety standard approved: robots, humans can collaborate safely

The American National Standards Institute has approved ANSI/RIA R15.06-2012, which addresses collaborative operation between workers and robots and soft axis and space limiting technology.

05/22/2013


A new American national robot safety standard has been approved by the American National Standards Institute (ANSI). Developed by Robotic Industries Association (RIA), the ANSI/RIA R15.06-2012 standard has been updated for the first time since 1999 and is now harmonized with the International ISO 10218:2011 standard for robot manufacturers and integrators.

RIA robotic safety standard was discussed at Pack Expo 2012. Courtesy CFE MediaA key feature in the standard is “collaborative operation,” which is the introduction of a worker to the loop of active interaction during automatic robot operation. Systems can now be designed for the operator to directly load/unload the robot or manually drive the robot to a selected location thus eliminating costly fixtures.

Another key feature is that the standard addresses “safety-rated soft axis and space limiting” technology. This optional feature available on new robots may have different names depending on the robot manufacturer, but the functionality remains the same. Safety-rated software is used to control the robot motion so that restricted space can be more flexibly designed. Case studies have shown that that this saves both floor space and cost in the system design.

Standards development efforts will now shift to issuing new documents which will provide guidance to the user on using the new ANSI/RIA R15.06, including technical reports on risk assessment and proper implementation of safeguarding robot systems.

American National Standards Institute (ANSI)

www.ansi.org 

Robotic Industries Association (RIA)

www.robotics.org 

See related articles below for more, related robotic safety information, videos, and photos. Also see the Machine Safety Blog.

- Edited by Control Engineering, Plant Engineering, CFE Media.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me