Robot safety standard approved: robots, humans can collaborate safely

The American National Standards Institute has approved ANSI/RIA R15.06-2012, which addresses collaborative operation between workers and robots and soft axis and space limiting technology.

05/22/2013


A new American national robot safety standard has been approved by the American National Standards Institute (ANSI). Developed by Robotic Industries Association (RIA), the ANSI/RIA R15.06-2012 standard has been updated for the first time since 1999 and is now harmonized with the International ISO 10218:2011 standard for robot manufacturers and integrators.

RIA robotic safety standard was discussed at Pack Expo 2012. Courtesy CFE MediaA key feature in the standard is “collaborative operation,” which is the introduction of a worker to the loop of active interaction during automatic robot operation. Systems can now be designed for the operator to directly load/unload the robot or manually drive the robot to a selected location thus eliminating costly fixtures.

Another key feature is that the standard addresses “safety-rated soft axis and space limiting” technology. This optional feature available on new robots may have different names depending on the robot manufacturer, but the functionality remains the same. Safety-rated software is used to control the robot motion so that restricted space can be more flexibly designed. Case studies have shown that that this saves both floor space and cost in the system design.

Standards development efforts will now shift to issuing new documents which will provide guidance to the user on using the new ANSI/RIA R15.06, including technical reports on risk assessment and proper implementation of safeguarding robot systems.

American National Standards Institute (ANSI)

www.ansi.org 

Robotic Industries Association (RIA)

www.robotics.org 

See related articles below for more, related robotic safety information, videos, and photos. Also see the Machine Safety Blog.

- Edited by Control Engineering, Plant Engineering, CFE Media.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me