Research sheds light on emerging technologies

Money is tight in manufacturing, but spending on emerging technology is on the rise. If you need to make that point to your corner office, here’s some new research on the market that may help. AMR Research released a report showing that enterprise resource planning spending will jump 12.3% in 2007.

01/01/2007


Money is tight in manufacturing, but spending on emerging technology is on the rise. If you need to make that point to your corner office, here’s some new research on the market that may help.

AMR Research released a report showing that enterprise resource planning spending will jump 12.3% in 2007. “The survey found that technology buyers understand the need to invest in better information systems, and in most markets they have the capital to do so,” a press release on the report noted.

That report can be found at www.amrresearch.com

Two new reports from ARC Advisory Group show continuing growth in the human-machine interface and distributive control systems markets

The HMI software market is expected to grow from $650 million in 2005 to more than $1 billion by 2010. The HMI software services market is expected to grow faster than the total HMI software market over the next five years. “The last two years have been witness to growth rates near 20%. The corresponding effect on supplier’s market shares has been equally dramatic,” said ARC analyst Stefan Surpitski, the principal author of the report, which can be found at www.arcweb.com/res/hmi .

The DCS market experienced the strongest growth in a decade between 2004 and 2005, increasing at a rate of close to 9%. This strong growth is expected to continue through 2010, with the global market increasing at an average annual rate of almost 7%.

“It’s really a perfect storm when it comes to DCS market growth,” said Larry O’Brien, ARC research director principal author of the report. The full text of the ARC study on the DCS market is at www.arcweb.com/res/dcsww .

Both reports were released in advance of ARC’s annual conference in Orlando. The topic of this year’s event, scheduled for Feb. 12 to Feb. 15, is “Driving Performance in a Flat World.” Plant Engineering is a sponsoring publication for the conference. For more information, go to www.arcweb.com .





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me