Research Center earns LEED Gold certification

Daikin and McQuay earned LEED Gold certification by the U.S. Green Building Council for its Applied Development Center (ADC) located at McQuay world headquarters.

12/10/2010


Daikin and McQuay earned LEED Gold certification by the U.S. Green Building Council for its Applied Development Center (ADC) located at McQuay world headquarters in Plymouth, Minn.

The 49,000-sq-ft (4,600-sq-meter) research center is an advanced facility for HVAC research and development. The Daikin McQuay ADC is used in the development of innovative, high-quality HVAC technologies that support the environment and provide reliable solutions for customers worldwide.

The Daikin McQuay Applied Development Center was designed and built by Mortenson Construction, Hammel, Green and Abrahamson architects and engineers, Hunt Electric and Eaton mechanical contractors. With more than 90% of the ADC’s energy generated by process loads (e.g., hot and cold water for chiller and compressor tests), energy savings are realized primarily by recovering 75% of that energy and diverting it back into the system.  Other environmental features include water-efficient landscaping, recycled construction waste, use of recycled content for interior surfaces, low-emitting sealants and locally purchased materials.

The Daikin McQuay ADC includes six test cells, with space for two additional cells in the future, that will facilitate the development of air- and water- cooled chillers, compressors and heat pumps as well as new air-conditioning systems.  Included are a worldwide range of electrical voltages/frequencies and a range of procedures for testing ambient conditions (temperature and humidity). The ADC can simulate building, electrical and climate conditions of any location throughout the world, allowing the basic design development of new products to be centrally located in the facility. These ‘global models’ are then arranged into a suitable design to match market requirements at existing regional development centers throughout the world.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me