Report reveals poor energy efficiency in UK public buildings

The Centre for Sustainable Energy revealed that thousands of government buildings are ranked in the lowest possible category for energy efficiency.

03/08/2011


The Centre for Sustainable Energy, an independent research and policy group in the UK, compiled and released data from more than 40,000 public buildings, showing that the country faces a steep challenge to improve energy efficiency across the public sector.

Data taken from display energy certificates (DECs) awarded to schools, government departments, and council offices, shows that while 5% hold an A or B certificate, 15% are in the lowest G band.

While it is difficult to calculate exact figures due to the number of duplicates in the database, UK-based environmental news website BusinessGreen estimates that the figures from 2008 to 2010 show around 270, or just 0.7%, of public buildings have an A rating. In contrast, more than 6,000 were awarded the lowest G grade.

The figures for 2010 show little improvement since 2008, when the government assessed the energy performance of all public buildings of over 3,280 sq ft. These buildings are required to display DECs, which grade buildings based on their carbon emissions.

Take up of renewable energy by public buildings has also been sluggish with only around 120 buildings sourcing more than half their electrical energy from renewable power and fewer than 600 taking more than 1% of their electricity from renewable sources.

The data was released the day before UK prime minister David Cameron launched a new national carbon plan that will require all government departments to accelerate efforts to green their operations.

View the full Centre for Sustainable Energy report here.

View an interactive map of the data here.

- Edited by Bettina Chang, Consulting-Specifying Engineer, www.csemag.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me