Regulatory reform improving, but slowly, NAM tells House

Regulatory reform is a major thrust of the Bush Administration’s agenda to help manufacturing become more competitive, and the Environmental Protection Agency has been especially responsive to the need to improve regulations, but some other agencies have done less than they could, according to Lawrence Fineran, Vice President for Legal and Regulatory Reform Policy of the National Associat...

08/01/2006


Regulatory reform is a major thrust of the Bush Administration’s agenda to help manufacturing become more competitive, and the Environmental Protection Agency has been especially responsive to the need to improve regulations, but some other agencies have done less than they could, according to Lawrence Fineran, Vice President for Legal and Regulatory Reform Policy of the National Association of Manufacturers.

Fineran told the House Small Business Committee’s Subcommittee on Regulatory Reform and Oversight that the regulatory review was a key element of the Administration’s Manufacturing Initiative. “The special attention was warranted,” Fineran said, “since at the time manufacturing was experiencing a recession where, for the first time since World War II, it led the downturn and lagged the recovery.

“A number of our member companies were skeptical of this exercise because they %%MDASSML%% and the NAM %%MDASSML%% participated in a similar exercise in 2002 and the results were disappointing,” Fineran said. “None of the regulations that the NAM nominated for improvement in 2002 had been changed by 2004.”

But the NAM worked hard to identify problem regulations and suggest modifications. The Office of Information and Regulatory Affairs (OIRA) used this information along with input from other groups to develop what is known as the “List of 76” regulations. “We were very pleased that five of our seven highlighted regulations were on that list,” Fineran said. “We were also pleased that a number of our more specific suggestions were on the list, and that most had timetables for action.”





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me