Reader forum

Cooking oil controversyI am writing regarding the ReaderForum submission, "Consider the codes" (PE, January 2001, p 7).In the part about using cooking oil to stop evaporation of water in traps, the letter's author makes a fundamental logic error in interpreting the plumbing code. I do not have a copy of that code so I am assuming that he quoted all relevant sections accurately in making his de...

01/01/1970


Cooking oil controversy

I am writing regarding the Reader Forum submission, "Consider the codes" ( PE , January 2001, p 7).

In the part about using cooking oil to stop evaporation of water in traps, the letter's author makes a fundamental logic error in interpreting the plumbing code. I do not have a copy of that code so I am assuming that he quoted all relevant sections accurately in making his determination that using cooking oil in a drainage trap is a code violation.

While it is obvious that cooking oil is insoluble, that does not automatically disqualify its use. As stated in Sec. 302.1: "...oil...or other insoluble material capable of obstructing, damaging, or overloading the building drainage or sewer system, or capable of interfering with the normal operation of the sewage treatment process, shall not be deposited, by any means, into the system."

I fail to see how cooking oil meets this second qualification. It will not cause any problems with plumbing, and every sewage treatment plant uses skimmers to remove oils as a normal part of the process. Any small amount of oil that might be released to a treatment plant would be dwarfed by the amount of oils and grease released every time someone washes his or her pots and pans.

I have also seen ads for flushless urinals in which an insoluble liquid with a deodorant is used to float on top of water soluble liquids to keep them from evaporating and fouling the room air. I doubt that these could be offered for sale if they were in violation of the plumbing code. — Robert Klein, Electrical/Misc. Engineer, Vulcan, Inc.

By whose authority?

In regard to your Editorial, "By whose authority?" ( PE , November 2000, p 14), the new concept may have its place, but not in my plant.

The people with authority today usually don't have the qualifications or experience to make a yes-or-no decision about my work responsibilities.

That's why my plant's operations are declining from the infrastructure to the production goals.

I have been the key person making these decisions for 15 yr, along with other engineers in their respective areas. Now for the last 5 yr, this situation has changed along with the plant's profitability.

We must return to qualified and experienced people who have responsibility and authority to carry out the projects that must be done in order to bring business back to the way it used to be. — Name withheld by request

Upcoming events

Facility Forum , the "Total Facility Management Event," is the most comprehensive conference and exhibition designed exclusively for the diverse needs of facility professionals. April 22%%MDASSML%%25, 2001, Dallas Convention Center, Dallas, TX. For information, visit facilityforum.com or call 800-524-0337 ext. 225 or e-mail ghaile@groupc.com.

Powder & Bulk Solids Conference/Exposition: The global center for dry processing and bulk material handling. Conference: May 7-11, 2001; exhibition: May 8-10, 2001; Donald E. Stephens Convention Center, Rosemont, IL. The show is free to all who register by April 13. Conference fees vary. For information, visit powdershow.reedexpo.com or call 800-354-4003.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me