PV inverter revenue expands to $7 billion in 2012, as Asia arises as growth driver

Global PV inverter market revenue last year rose to $7.1 billion, up from $6.7 billion in 2011.

04/22/2013


IMS Research (acquired by IHS, Inc.)Energized by a surge of shipments in Asia, the global photovoltaic (PV) inverter market in 2012 bucked weak worldwide solar industry conditions to expand by 5% and break the $7 billion level for the first time.

Global PV inverter market revenue last year rose to $7.1 billion, up from $6.7 billion in 2011, according to the latest PV inverter market report from IMS Research, now part of IHS Inc., as presented in the attached figure.

“Despite lower PV installation growth and rapid price declines, inverter sales have managed to generate growth, all be it at just low single-digit levels—a notable achievement amid such weak market conditions in the solar market,” said Sam Wilkinson, PV inverter research manager for IHS. “Growth was driven by a strong increase in sales in Asia in the fourth quarter, which managed to offset a sequential decline of more than 20% in the Europe/Middle East/Africa region (EMEA). This helped to drive annual shipments to 31 GW in 2012, up from 27 GW in 2011.”

Revenue growth was somewhat restrained by intense price competition and a shift toward more sales in lower-price markets such as China, India and Eastern Europe. These regions tend to prefer larger inverters that have lower prices, driving a significant decline in average blended pricing and resulting in much more modest revenue growth for the year.

Asia drives 2012 growth

Asia was the only major region whose PV inverter revenue grew sequentially in the final quarter of 2012. Quarterly shipments in this region jumped by almost 1 GW, expanding annual shipments by 63% compared to the same time in 2011.

This strong growth was caused largely by China and Japan, both of which enjoyed record shipment levels in the fourth quarter.

“China and Japan are expected to account for a growing share of global demand, but these markets are notoriously difficult for non-domestic suppliers,” Wilkinson said. “Developing successful strategic partnerships and obtaining local certifications for products will be critical steps required for suppliers to succeed in penetrating these markets.”

Demand for PV inverters in Asia will expand by more than 60% again in 2013, IHS predicts.

European suppliers slip

The PV inverter industry in 2012 continued to be dominated by European and U.S. suppliers. However, IHS analysis shows that this landscape is changing rapidly.

With the market shifting to Asia, the position of European suppliers slipped in 2012. The combined market share of the three largest European suppliers fell dramatically, declining to less than 30% in the fourth quarter of the year, down from almost 50% in the first quarter.

Top 3 suppliers unchanged, but leaders’ market share dips in 2012

For the second year running, SMA of Germany; California-based Power-One; and Kaco, also of Germany, were the world’s three largest PV inverter suppliers. However, these suppliers’ absence from the fastest-growing major markets of Japan and China put their market share under considerable pressure near the end of the year.

“SMA, which once was the undisputed market leader, saw its market share fall below 20% in the fourth quarter of 2012,” Wilkinson said. “That’s the lowest level that we have on record in over six years of analyzing the market. SMA has taken action by acquiring a stake in a Chinese supplier and aggressively targeting the Japanese market, and these are important steps in protecting its leading position in the PV inverter market. However, it remains to be seen if these actions will be aggressive enough as the PV market continues to fragment.”

Smaller suppliers surge

The ranking of suppliers below the three leaders changed significantly.

Four of 2012’s largest suppliers made big increases in their rankings: Colorado-based Advanced Energy, Enphase Energy of California, Danfoss Solar Inverters from Denmark and Omron from Japan. These companies all gained at least four places in the rankings.

Just one European supplier in the Top 10—Danfoss—was able to increase its global ranking in 2012, reflecting the changing supplier landscape as markets outside of Europe begin to account for a growing share. An Asian supplier and a microinverter supplier also appeared in the Top 10 for the first time in 2012.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me