PV inverter market achieves record for 2011

IMS Research reports that the PV inverter market exceeded 26 GW in shipments for the first time ever thanks to surging sales in Asia and the Americas, which made up for sluggish sales in Europe.

02/08/2012


The PV inverter market achieved a new record in 2011 with shipments exceeding 26 GW for the first time according to preliminary results from IMS Research. The research firm found that inverter shipments grew by more than 10% in 2011, despite the huge inventory overhang from the year before.

IMS Research’s preliminary Q4’11 report found that inverter shipments grew by up to 15% in 2011, with more than 8 GW shipped in the last quarter of the year. The report collected sales and shipment data from more than 40 of the largest manufacturers, accounting for more than 85% of the industry, and found major regional variations. “Germany remained the largest market, but saw shipments fall by more than a quarter in 2011. This was because of the very high inventory levels in the country at the start of the year as customers sat on high stocks of string inverters. Although many of these inverters were subsequently re-exported to other markets or returned to manufacturers, underlying demand was still not high enough and saw shipment sink considerably“, commented Senior Research Director Ash Sharma.

While the German marked performed poorly in 2011, this was more than offset by other markets. China performed extremely well following the country’s introduction of its FiT and saw shipments of nearly 3 GW, while the Americas market achieved shipments of close to 4 GW. The report also found that while both Italy and the UK drove high inverter shipment growth, this was not enough to prevent the European market from falling in 2011. In total IMS Research estimates shipments grew by up to 15% globally in 2011 but revenues were flat in US Dollar terms and slightly down in Euros.

The research firm estimates that inventory levels have returned to more “normal” levels, though significant regional variations are occurring. “Inventory levels have greatly reduced in Europe, with inverters being re-exported from Germany, especially those not compliant with the new low-voltage directive requirements. However, inventory levels are understood to have increased considerably in the USA and Asia. In the USA this was caused by customers stock-piling large volumes of inverters ahead of the expiration of the 1603 program. These inverters will of course now be installed in 2012,” explained Sharma.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me