PTO reports high growth, cross-industry collaboration
Profibus nodes in the market have surpassed the 25 million mark, said the PTO, nearly a 25% annual growth rate since 2004. The organization gave the information at its 2008 annual conference, in Scottsdale, AZ, held Aug. 5-7. Did you miss the annual meeting? PTO offers numerous industrial network training opportunities in a variety of North American cities. See images.
Scottsdale, AZ – The number of Profibus nodes in the market has surpassed the 25 million mark, said the PTO (previously known as the Profibus Trade Organization, but now also encompassing Profinet). Based on a node count of 10 million reported at the 2004 annual meeting, this increase represents a nearly 25% annual growth rate, the organization explained at its annual conference, in Scottsdale, AZ, held Aug. 5-7.
Miss the PTO annual meeting? Other industrial network learning opportunities are available at www.us.profibus.com .
“We weren’t expecting to hit that number (25 million) for another two years,” said Mike Bryant, executive director, PTO, at the 2008 PTO General Assembly meeting. He attributes the achievement largely to a spike in the number of devices sold and installed in the past few years in both discrete and process applications worldwide. Profibus PA for process applications accounts for 750,000 of the 25 million node count, while Profibus DP for discrete applications accounts for 23,300,000 nodes sold and installed through 2007.
To determine the number of nodes in the marketplace, Carl Henning, PTO deputy director, said the Profibus User Organization contracted with an independent Germany-based notary firm to compile results from a survey of manufacturers that install Profibus and Profinet in their products.
Mike Bryant, PTO executive director; image courtesy of Geoff Hodgkinson
Bryant said that 2.6 million Profibus nodes were sold in the first half of 2008, leading the organization to expect the overall node total to reach 30 million by the 2009 annual meeting.
New goal is 50 million total in 4 years
“Our goal now is to reach 50 million nodes by 2012, selling 4.5 million chips a year,” Bryant said.
Installed Profinet nodes, according to Bryant, currently stand at 1.14 million, which places its count just behind EtherNet/IP nodes, which stand at 1.4 million, according to a recent ARC Advisory Group Study. ARC expects Ethernet-based industrial protocols to grow by 27.5% over the next five years.
“We’re looking to achieve a 37% growth rate with Profinet over the next five years,” Bryant said, “reaching the 3 million mark by 2010. Ultimately, our goal is reach the 100 million node mark, counting both Profibus and Profinet, over the next 10 years.”
Bryant attributes much of the past and expected future Profibus/Profinet growth to PTO’s long-standing collaboration with groups like OPC Foundation , HART Communication Foundation , and Fieldbus Foundation .
As an example of this cross-group collaboration, Tom Burke, president and executive director, OPC Foundation, noted at the PTO meeting that OPC, PTO, HART and Fieldbus Foundation have agreed to endorse EDDL (electronic device description language) as an international standard for interoperability to manage device configuration, calibration, diagnostics, data and alarms, and operator interface technology. Next steps for collaboration among the four groups were initiated at Hannover Fair in 2007 and call for drafting a spec by December 2008 that delineates one, consistent solution for interoperability regardless of supplier, compatibility with the installed base, and clear technical direction to be shared by all suppliers.
Also at the PTO conference, Ron Helson, executive director, HART Communication Foundation (HCF), addressed HCF and PTO’s long-standing collaboration record, including work on IEC 61804 in 2001, graphics and visual enhancements in 2003, the use of HART over Profinet in 2006, and incorporation of HART in Profinet in 2007. Helson also pointed out that Fieldbus Foundation and PTO have accepted WirelessHART as the wireless technical standard for process field devices and are currently working with HCF to link fieldbus networks via a gateway to WirelessHART devices.
Also read: Learning: Profibus, FDT seminars; FDT testing .
– David Greenfield , editorial director
Control Engineering News Desk
Register here and scroll down to select your choice of eNewsletters free .
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
- Survey Prize Winners
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey