Proposed standard to bring Green building practices mainstream

Proposed Standard 189P will provide minimum guidelines for green building practices is nearly complete. It will provide a baseline for sustainable design, construction and operations in order to drive green building into mainstream building practices. The standard will apply to new commercial buildings and major renovation projects.

06/01/2007


A proposed new standard that will provide minimum guidelines for green building practices is nearly complete and has been released for public review and comment.

Standard 189P: Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings will provide a baseline for sustainable design, construction and operations in order to drive green building into mainstream building practices. It will apply to new commercial buildings and major renovation projects and will address key areas of performance including energy efficiency, greenhouse gas emissions, sustainable site selection, water usage, materials and resources and indoor environmental quality.

“Standard 189P will become the benchmark for all sustainable green buildings in the United States because it is being developed for inclusion into building codes,” said John Hogan, chair of the Standard 189P project committee. “This means that owners and designers will have a consensus-based document that will set the minimum criteria that a building must satisfy in order to be considered a green building.”

Comments on the standard will be accepted through July 9, 2007 at www.ashrae.org/publicreviews . The standard is being developed by the American Society of Heating, Refrigerating and Air-Conditioning Engineers in conjunction with the Illuminating Engineering Society of North America and the U.S. Green Building Council .

Click here to read the full press release.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me