Precision gearing - 'Value lines' growing faster than lowest backlash

Recovery in the machine tool and robotics sectors suggest a slow, but steady growth for the precision gearing industry, though it will not exceed 2008 levels until 2013.

11/07/2011


Over the last ten years, the trend towards servo technology in machinery design has resulted in a large, strong market base for suppliers of gearboxes below 20 arc minutes, but looking forward, it appears that lower price value lines are expected to account for all of the $45 million with which the 2013 Americas and EMEA precision gearing market is expected to exceed 2008 levels.

Is this a sign that lower prices are now trumping performance in high end gearing markets? Should we expect to see factory floor robot arms starting to rattle just a little bit?

Reassuringly, No! It is simply a function of the rate of growth of the constituent user markets. The market base for lowest backlash products, (below 5 arc minutes) is almost entirely constituted by builders of machine tools and robotics equipment, and this is not changing. Accurate repeatability and minimal axis ‘play’ remain critical in these applications. Outside of these applications, the need for backlash below 5 arc minutes is rare, and customers have little interest in paying for excessive functionality. This limits the growth potential of lowest backlash gearboxes almost exclusively to growth within robotics and machine tool machinery production sectors.

In comparison, the market for lower performance products, (above 5 arc minutes) is much more diverse and growing across a broad range of emerging markets for servo technology. The preference of centralized PLC based control over less flexible mechanical and discrete setups has increased the use of servo technology in system design, to the point where servo motors are now commonplace in comparably low-end markets such as packaging machinery and food and beverage equipment sectors. This has increased demand for servo compatible speed reducers. Even though dynamic response servo compatibility are the primary criteria, modest levels of backlash are beneficial for optimal system efficiency and therefore these products are frequently selected from low backlash geared product lines. This is causing growth in the market for lower priced ‘value’ or ‘economy’ lines with backlash between 10-20 arc minutes. These applications are also providing an increasing market for suppliers of a relatively new competing technology, specifically servo rated industry grade geared motors.

Profile photo of Robert Carter, a principal analyst for IMS Research who specializes in the power transmission. Courtesy: IMS ResearchSo while lowest backlash products continue to grow steadily as a result of recovery in the machine tool and robotics sectors, they are not expected to exceed 2008 levels before 2013. This limits new opportunities for backlash rated gear suppliers to within the market for lower price, less functional (10-20 Arc min) power transmission, through to 2013 at least.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me