PMI decline shows manufacturing in a slump

The Institute for Supply Management's Purchasing Managers' Index (PMI) stayed in contraction and showed an overall decline for the seventh straight month due to global concerns.


Index stayed in contraction, slides for seventh straight month over global concerns. CFE Media file photo.

Manufacturing officially is in a slump.

The Institute for Supply Management's (ISM) monthly Purchasing Managers' Index (PMI) stayed below the 50% contraction level in December, sliding 0.4 percentage points to 48.2% It was the second straight month of contraction for the PMI, and the seventh consecutive month of decline for the benchmark manufacturing index. It's also the lowest reading for the PMI since a 45.9% reading in June 2009. 

The fall in December was not unexpected. There were reports of a continuing decline in the Chinese manufacturing market, which led to a Jan. 4 selloff in stock markets in China and the United States. The Dow Jones Industrial Average fell 350 points at the open of the first trading session of 2016. Perhaps more troubling to the manufacturing sector is some issues cited by ISM's Business Survey Committee show no sign of going away soon.

"As was the case in November, 10 out of 18 manufacturing industries reported contraction in December," said Bradley Holcomb, chairman of the ISM Business Supply Committee. "Contraction in new orders, production, employment and raw materials inventories accounted for the overall softness in December."

A weakening in oil prices has different impacts on different sectors. A committee member in the petroleum and coal products industry said, "Low oil prices are negatively impacting oil and gas exploration activities. Low oil prices are generally positive for the petrochemical industry."

Index stayed in contraction, slides for seventh straight month over global concerns. CFE Media file photo.

However, a committee member in the rubber and plastics industry noted, "Business is going well. Low fuel prices keep full size SUV and truck sales at high volumes." Some committee members noted there were annual slowdowns expected in December, due to employment furloughs and tighter year-end budgets. But a committee member in the computer and electronics sector, a market usually bolstered by the Christmas season, noted, "December revenue is flat compared to last month."

Since hitting 53.5% in June 2015, the PMI has been on a long, slow decline, finally falling below the 50% threshold for manufacturing expansion in November for the first time in three years.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me