Pluggable surge protection for photovoltaic systems from Phoenix Contact
Phoenix Contact’s Valvetrab MS surge arresters protect photovoltaic systems up to 1000 V. The VAL-MS 1000DC/2+V-FM protects two-position dc voltage systems up to 1,000 volts. Other voltages are available.
Phoenix Contact’s Valvetrab MS surge arresters protect photovoltaic systems up to 1000 V. The VAL-MS 1000DC/2+V-FM protects two-position dc voltage systems up to 1,000 volts. Valvetrab MS is also available for other voltages commonly used in small-scale photovoltaic systems and power systems (12 V to 600 V dc).
The rail-mountable arresters protect both insulated and solidly grounded systems. The protective circuit is thermally and dynamically monitored. In the event of damage, it disconnects the arrester from the generator, the company says. The VAL-MS surge arresters are available with or without remote indication contact.
Phoenix Contact develops industrial electrical and electronic technology, including components and system solutions for industrial and device connection, automation, electronic interface and surge protection. Phoenix Contact GmbH & Co. KG, Blomberg, Germany, operates 47 international subsidiaries, including Phoenix Contact USA in Middletown, Pa.
Also read from Control Engineering:
-Edited by Mark T. Hoske, Control Engineering, www.controleng.com
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.