Picky, picky

My wife says I'm a picky eater. She's probably right. I'll grant you I have limited tastes in food. But mainly I just like to eat what I like and not experiment much with food β€” especially when I'm paying for it in an expensive restaurant. Some people like to experiment, especially when they eat out.


My wife says I'm a picky eater. She's probably right. I'll grant you I have limited tastes in food. But mainly I just like to eat what I like and not experiment much with food β€” especially when I'm paying for it in an expensive restaurant. Some people like to experiment, especially when they eat out. I'm not one of those people.

Another thing is that there are certain foods I just don't care for. Peppers are one, and that eliminates a lot of dishes for me. These days, it seems like peppers are added to almost everything. When I'm served something with peppers in it, I pick them out. That makes me literally a picky eater.

Nonfood products are getting to be like foods these days. Software comes to mind immediately. Most of the programs I use have a lot of features I don't care for, and I wouldn't buy those features if they weren't already built in. That doesn't mean they're bad. Apparently many, if not most, people like them. Cameras are like that, too. The digital camera I bought must have 20 features on it I never use. But the cameras without those useless features didn't have very good resolution or lenses. I have the feeling lots of industrial products are moving in the same direction.

Finding products that offer just the features I want without a lot of extra stuff thrown in is about as difficult as finding the right food to order. My wife says I'm a picky shopper.

Over the years, I've fit in pretty well with the plant engineering crowd. Not because they're picky eaters. Near as I can tell, as a group, they aren't. But maybe their tendency to be picky shoppers has something to do with it.

A new study conducted for PLANT ENGINEERING by Reed Research Group, reveals some interesting information about buying practices.

For example, on average, 46% of equipment, parts, and materials purchased by plant engineers are standardized by brand. That's up from 44% in a 1997 study. And 28% of survey respondents say standardization will increase by 2007.

Brand loyalty is pretty high, too. Currently, only 14% of purchases reflect brand switching. Projections are that brand switching may increase some, but not much.

These data tend to confirm what I've believed to be the case for years. Plant engineers are careful (dare I say "picky"?) shoppers who find the right products for their applications and stick with them. They want products that do what they are designed to do extremely well. And when they find those products, they continue to specify them.

Plant managers with picky shoppers in the plant engineering department should be grateful.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me