OSHA updates training rules to limit class length

After audit finds problems, instructors now limited to 7 1/2-hour days to enhance learning experience


OSHA recently revised its policy for all Outreach Training Programs to address the number of hours each day a student may spend in OSHA 10- and 30-hour classes. OSHA revised the length of daily classroom instruction to prevent workers from being saturated with so much information that they may miss content that could prevent injuries, illnesses and death.

Revised program policy now requires OSHA trainers to limit worker training classes to a maximum of 7½ hours per day. Before OSHA made this change, there were no limitations on how long these classes could last each day. With 10 hours of training, along with necessary breaks and lunch, students could sit in classes for up to 13 hours a day. OSHA became concerned that long, mentally-fatiguing class days might cause students to miss essential safety and health training.

Another concern was that, in some cases, one- and three-day training classes were not meeting 10- and 30-hour program time requirements. This concern became evident after OSHA conducted random records audits and unannounced monitoring visits.

To address these issues, the agency now requires OSHA outreach trainers to conduct 10-hour courses over a minimum of two days and 30-hour courses over at least four days. The agency also set up an outreach fraud hotline at 847-725-7810 to which the public can call to file complaints about program fraud and abuse.

“Limiting daily class hours will help ensure that workers receive and retain quality safety training,” said Assistant Secretary of Labor for OSHA David Michaels.

This policy change is effective immediately and will be reflected in the next revision of the Outreach Training Program Guidelines. OSHA will not recognize training classes that exceed 7½ hours per day or do not meet all program content requirements. In such cases trainers will not receive completion cards to distribute to students. Trainers may, however, submit written requests for exceptions to limiting training days to 7½ hours based on extenuating circumstances.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.