Optimize refrigeration systems energy usage

Maintenance and monitoring are just two of the six ways.

01/06/2014


Six ways to optimize energy usage in refrigeration systems. Courtesy: CFE Media with information provided by Luke Facemyer.Refrigeration costs account for the majority of a plant’s total electrical costs, often exceeding 60% of total operating expenses. As energy costs continue to increase, more and more food processors are realizing the need for energy optimization and monitoring as a way to increase productivity and lower energy costs. 

Optimizing the entire systems

The key drivers in managing energy efficiency are reducing operational costs, utilizing existing systems to reduce equipment costs, analyzing the ROI for new controls system upgrades, and conducting a power quality assessment.

Most refrigeration systems are designed to optimize the efficiency of each individual component rather than looking at the entire system as a whole and ensuring that all components work together efficiently. Many processors add new equipment without regard to the impact on the total system, leading to wasted energy and operational inefficiencies. 

Top six ways to save energy 

Maintenance: Conduct regular maintenance to check for dirty filters, broken sensors, failed insulation and other malfunctions that could be wasting energy.

Monitoring: Know how much, when and where energy is being used. Install  alarms and monitoring systems to identify inconsistencies and trends that could be wasting energy.

Energy Recovery: Capture wasted heat from condensers and turn it into energy.

Water Savings: Manage and reclaim the water that’s evaporated from your condenser.

Operations: Change your set points or put in controls to do it automatically to better manage processes and efficiency.

Design: Select the proper equipment based on size and compatibility, install VFDs

Energy audits – energy efficiency checklist

Perhaps one of the biggest advantages of automation is the ability to optimize the entire system to increase efficiency and reduce operating costs. By collecting and analyzing data, technicians can identify systems that are running in an inefficient manner and correct them. 

Technicians can manage the control and sequencing of all equipment to maximize energy efficiency. They can run trend analyses, alarm logs, energy management data, and runtime reports in real-time to improve the efficiency and reliability of your entire system.

- Edited by Jessica DuBois-Maahs, Associate Content Manager, CFE Media, Plant Engineering, Control Engineering



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me