Offshore wind farms sparked by HVDC

A unit of E.ON, Germany's largest utility, is working on a project to link the world’s largest offshore wind farm to the German power grid at minimal impact to the environment.

12/16/2008


Zurich, Switzerland– A unit of E.ON, Germany's largest utility, is working on a project to link the world’s largest offshore wind farm to the German power grid at minimal impact to the environment.



The 400-megawatt (MW) wind farm, located 130 kilometers from the coast in the North Sea, is expected to save carbon dioxide emissions of 1.5 million tons per year by avoiding the need for additional fossil-fuel generation.



ABB is connecting the park– the most remote wind farm in the world – using high-voltage direct current (HVDC) transmission technology. Although HVDC has been available for more than 50 years, ABB’s development of the technology to produce the related HVDC Light about 10 years ago provided the technological means tobuild wind parks far from the coast.



Germany aims to generate 20% of its power from renewable sources by 2020, compared with about 14% in 2007. Wind power accounted for about 40% of Germany’s electricity from renewable sources last year, but with the best onshore locations already developed, the country’s utilities are turning to offshore sites.



The main attraction of going offshore is the enormous wind resource available. Average wind speeds can be 20% higher than on land, and the resulting energy yield from wind farms as much as 70% higher.

While three-phase alternating current (AC) links are a cost-effective way to connect small offshore wind farms near the coast to the electricity network, HVDC Light is emerging as the potential technology of choice for more distant offshore parks.



According to ABB, power can be fully controlled using HVDC Light, so that the intermittent electricity supply from a wind farm cannot disrupt the grid. An HVDC Light transmission system can also be started from a powerless state, such as could be the case if the wind hasn’t been blowing at all. The company also notes that with HVDC, very little electricity is lost during transmission, even over long distances.



The use of oil-free cables running underwater to the coast, then underground to a substation 75 kilometers inland, are further ways in which the transmission technology minimizes the environmental impact of the NORD E.ON project. The 80-turbine farm is scheduled to enter service in 2009.



For more information, visit www.abb.com

Control Engineering News Desk

Register here and scroll down to select your choice of eNewsletters free .





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Getting ready for industrial IoT; Visualizing the (applied) automation continuum; Preventing VFD faults and failures; Using wireless for closed-loop applications
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.