OEMs under pressure over tire monitoring systems

Impending legislation in Europe has forced OEMs to fit direct or indirect tire pressure monitoring systems (TPMS) on new passneger car models by 2012 and on new passenger cars by 2014. Both direct and indirect systems, however, have distinct advantages and disadvantages.

10/06/2011


Tire pressure monitoring is a topic of much debate amongst OEMs. Choosing the best system for their vehicles, whilst also fulfilling certain legislation in specific regions, is of utmost importance both in terms of revenue and customer satisfaction.

In the U.S. there has been legislation since 2007 for 100% fitment of tire pressure monitoring systems (TPMS) in new cars. Impending legislation in Europe for mandatory TPMS on all new passenger car models by 2012 and on all new passenger cars by 2014, has forced OEMs to fit TPMS to their vehicles.

OEMs do, at least, have a choice of TPMS technology: direct or indirect. The direct system uses sensors in the wheels, to wirelessly communicate air pressure and temperature information to the driver’s instrument cluster. The indirect system uses software algorithms to derive pressure information from existing sensors in the ABS or ESC system. Despite the choice, the decision of which technology to use isn’t an easy one as there are advantages and disadvantages to each system.

Using the direct system gives the driver actual pressure and temperature values.  However, battery life of the sensors can be an issue and to replace them and the tires can cost $300-400 to the consumer. This could be a problem for second hand or third hand owners of cars. Also, to the OEM, a direct system can be more expensive (as it requires dedicated hardware).

On the other hand, the indirect system is less expensive, as the OEM pays a licensing and application fee, the cost of which can then be applied across many vehicles. However, from an operational perspective, the system requires the customer to be an integral part of the TPMS. For example, every time the tires are inflated, the customer has to press a reset button to normalize the system.

This ‘operation’ of an indirect TPMS could be viewed by drivers as a potential downside of the system, as opposed to a direct system which has minimal driver input. Furthermore, drivers could well favor a system that gives ‘instant’ pressure values.

It is my opinion that most OEMs will continue to use direct TPMS in both legislated and unlegislated regions. The direct system is ‘tried and tested’ and is known to comply with legislation. There are still doubts that the indirect system will be able to fulfill legislation. If an OEM uses the indirect system in a car, and then it turns out that the indirect system does not comply with legislation, the OEM cannot sell that car – a significant concern for any OEM.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me