NYC dumps port-o-johns for improved public toilets

The first of 20 automated, self-cleaning public toilets opened Jan. 10. The restroom’s architectural and engineering features bring to mind a space-age facility.

01/30/2008


Not too many things can be bought for a quarter, but 25 cents gives one visit to New York City’s new public toilets. These are not the port-o-johns of old, but calls to mind something constructed for the Starship Enterprise.

The first of these toilets was unveiled Jan. 10, with 20 planned for the city after more than 20 years of false starts and frustrations. This toilet faces Madison Avenue, just north of 23rdStreet, and at first glance looks like a bus shelter.

The outside structure has a small pyramid of glass, like a little model of the Louvre, and an anachronistic metal stovepipe, reminiscent of a cozy shanty or an old outhouse with a crescent moon carved into the door. But no one goes to a bathroom to look at it. When the green light marked “vacant” is lit, 25 cents—coins only, no bills—starts the visit.

paying, the door slips open like an elevator, but then it stays open, to accommodate those who need extra time getting in. Meanwhile, men and women in suits walk past. It is very difficult to look inconspicuous in a bathroom on a sidewalk in New York with the door open. There is just nothing to do but stand there. And the delay will not please those who are in distress.

Finally, the door closes, and the first surprise is the quiet. The walls are padded to dampen street noise, leaving just the hum of a little fan overhead.

Six little lights and the skylight in the pyramid cast a neutral glow over the user’s home for the next 15 minutes, the maximum time limit.

This toilet, which cost more than $100,000, is very spacious, large enough to accommodate a wheelchair. One cannot touch the side walls with arms outstretched.

The floor is rubber and, more strikingly, very wet, but not in a bus-station-men’s-room way. There is an antiseptic, fresh smell to the place.

Sadly, these little surprises are forgotten with the first look at the toilet itself, an imposing, metal, cold-looking receptacle in the corner. There is no little stall around it, and so it looks exposed, like the facilities available in many prisons.

There is no seat to raise or lower, just the wide rim of the bowl, with covers made of tissue available in a dispenser to the side. Sitting down is a leap of faith, like falling backward into a stranger’s arms at a corporate team-building retreat.

Turns out, it is cold. But once settled, the visitor finds the seat the perfect place to take in the room’s other amenities.

 

There seem to be as many buttons as on Captain Kirk’s bridge. Red buttons, blue buttons, yellow buttons, black and green buttons. The red ones near the door and toilet call the company for help in an emergency. The yellow calls for “assistance,” presumably something less dire than an emergency, but nonetheless, a situation. Blue flushes.

Black dispenses toilet paper. One will quickly familiarize oneself with that button, because the designers have deigned a little 16-inch strip the standard helping of paper. A word to the wise: There is a maximum of just three helpings. Another tip: Do not tarry. A grim yellow light turns on when there are just three minutes remaining, and after that, the door will open.

The sink is across the room. The big shocker here is the soap dispenser, which actually emits not a little squirt of soap, but a jet of warm water, with the soap already mixed in. Everything is motion-activated. No knobs anywhere. The warm-air hand dryer seems somewhat slow and weak, especially with that yellow light blinking by the door.

Assuming one finishes before the 15 minutes are up, the big green button opens the door. The horns and sirens and chatter of the city return, jarringly.

When the visitor steps out, the door shuts again, but the “occupied” light stays lit. Strange hisses and spraying sounds come from within — did someone slip past? No, actually, the room is cleaning itself. A robotic arm swings out over the toilet bowl and hits it with disinfectant, while similar jets spray across the sink and the floor. Then, dryers fan hot air over everything, but like the hand dryer, they seem to need more juice.

This is all taken at the designer’s word, for it is impossible to see. The cleanup cannot happen with someone in the room, with sensors below the floor to detect any weight.

After 90 seconds of cleaning, the green light outside comes back on.

To watch a video of this self-cleaning toilet in action, click here.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me