Nuts and bolts of machine safety

For machine safety – let’s see the hands for everyone who’s familiar with current “nuts and bolts” for compliance! Ah, does the word current cause so few hands to be held high?


For machine safety – let’s see the hands for everyone who’s familiar with current “nuts & bolts” for compliance!

     Ah, does the word current cause so few hands to be held high? We’ll, don’t be intimidated by these results. Old habits and the notion that “this works” are hard to break. It’s called, change! 

     It’s not that someone’s moved the cheese. Simply, there are more kinds of cheese on the table. If “this works” meets all the requirements for your compliance and business goals then by all means you’ve probably got the necessary nuts and bolts for your business. However, would your top management answer this question the same way? Are the “nuts & bolts” of machine safety in your organization a shared value from the CEO to the machine operator? As an operator, is it OK for you to shut the machine down because of a critical safe guard fault?

     In my opinion, for the nuts & bolts of machine safety to be an organizational shared value then there can’t be any communication barriers from top to bottom OR bottom to top!

     Machine safety industry experts say that your safety culture needs to be an enabler of a shared value approach in order to nurture continuous improvement toward the current “nuts & bolts” of machine safety. (I had to put all of that into one sentence.) That’s a mouth full but that is today’s challenge and opportunity in manufacturing. There have been truck loads of new developments in the US since 2002 with changes in industry safety standards and new solutions (technology) for machine guarding applications. Educational opportunities abound from web based training, local seminars, in house seminars, technical hands on seminars for technicians, executive overview seminars for top management,…..and more. Yes, top management also needs training because they set policy and strategy.

     Staying current is a top to bottom obligation in order to attain a shared value – in my opinion.

What’s yours?

Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Nuts & Bolts of Machine Safety.

Related articles:

Safety integration webcast: Changing regulations, efficiency, productivity

How To Integrate Safety

Machine Safety - Hardwired vs Integrated?JB Titus, CFSE

Updating Minds About Machine Safety

Machine safety pays off

Contact: for “Solutions for Machine Safety”.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.