Novartis: Offsite MEP prefabrication

A 700,000-sq-ft research facility is being built for Novartis in Cambridge, Mass.

12/23/2013


While slabs are being poured and steel is being fireproofed on Building 608 (one of the two lab towers), MEP prefabrication is well underway in the offsite facility. Courtesy: Cannon DesignWork for Novartis has begun implementing an innovative construction technique – off site prefabrication combined with Building Information Modeling (BIM). While the steel is still going up, MEP systems are being assembled as coordinated modules at an offsite construction facility, located a short distance from the site of the new 700,000-sq-ft high-end research facility in Cambridge, Mass. The modules themselves are assembled at the offsite facility, ranging from 10 to 60 ft long. Once completed, they will contain ductwork, HVAC piping systems, plumbing piping systems, air terminal units, and conduit. Systems are able to be pressure tested and fully insulated before even leaving the facility.

The multi-trade prefabrication effort has allowed for cost savings seen by the client, compressed construction schedules, and improved safety. Large scale buildings with similar floor plans and programs create an ideal opportunity for prefabricated modules. Skanska Construction has recognized these benefits, and is implementing MEP prefabrication in construction projects all over the world. Prefabrication techniques similar to the ones being used for Novartis are becoming more and more prominent in the industry, paving the way for the future of construction.

While slabs are being poured and steel is being fireproofed on Building 608 (one of the two lab towers), MEP prefabrication is well underway in the offsite facility. Courtesy: Cannon DesignThis portion of the well-organized facility is designated for riser fabrication. Courtesy: Cannon DesignPrefabricated exhaust riser arrives on site. Shown above is the riser being raised by crane and lowered into the shaft. Courtesy: Cannon Design



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me