NMW survey: Cautious optimism, cautious growth in 2006

The 2006 National Manufacturing Week survey of manufacturers in the United States shows that 44% expect manufacturing to trail the overall economy in 2006, up from 34% in the previous year's survey, and that a substantial majority expect the economy to grow more slowly - less than 2.9% - in the year ahead than most economists predict.

04/01/2006


The 2006 National Manufacturing Week survey of manufacturers in the United States shows that 44% expect manufacturing to trail the overall economy in 2006, up from 34% in the previous year's survey, and that a substantial majority expect the economy to grow more slowly - less than 2.9% - in the year ahead than most economists predict.

"Most economists expect the overall economy to do better than that, including our own" said National Association of Manufacturers President John Engler. "It's not that manufacturers are unduly pessimistic, but they are contending with unprecedented challenges that affect their outlook."

On the brighter side, Engler said that more than half of the respondents expect to increase capital spending in 2006 and to increase employment, and that almost three-fourths of them now report they are exporting to other countries. "These are all positive signs," he said.

Tony Raimondo, Chairman and CEO of Behlen Manufacturing Company in Columbus, Nebraska, and a member of the NAM Board of Directors, said that energy was looming ever larger as a serious cost factor in his industry. "The government encourages us to rely more and more on natural gas for energy, and then makes it virtually impossible to access more supplies of natural gas. The result is the highest natural gas prices in the world."

"We have also got to get a handle on health care costs," Raimondo said. "We're looking at double-digit cost increases every year on what is already a major cost item. This survey shows that the cost of 'non-wage compensation' is having the greatest negative impact on manufacturers today, and by far the biggest item in that category is health care."

"If the U.S. is to preserve its position as a major economic power in the 21st century it must stay out in front of the innovation curve, and it will need a much better-prepared workforce to do so," Engler continued. "Like every modern nation, the United States is deeply involved in globalization. Technology and competition will only increase America's need to have access to highly skilled professionals. But our schools and training programs just aren't doing the job."

Ronald D. Bullock, CEO of Bison Gear & Engineering Corporation in St. Charles, IL, underscored Engler's comments. "I recently filled an engineer's position that had been open for 18 months," Bullock said. "Right now, I have at least five empty slots, some of which have been empty for months. I need more people to keep up with demand, but I can't just hire anyone off the street. This is complicated work. We need people with strong backgrounds in math, science and computers."





The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me